General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by steven antonucci 6/2/15, 8:45 PM
6 Replies · 44 ViewsLast post 10/28/15, 7:15 PM by ChuckInND -
WC Weekend Accomplishments....
by Dennis E Peacock 10/26/15, 4:01 PM
9 Replies · 28 ViewsLast post 10/28/15, 5:31 AM by TomD -
Questions to DEWALT DWE7480 owners 2
by George Saridakis 10/19/15, 11:25 AM
29 Replies · 99 ViewsLast post 10/27/15, 3:59 AM by Ellis Walentine -
A Centralian passes on... *LINK*
by Jason Roehl in Lafayette, IN 10/23/15, 8:30 AM
7 Replies · 45 ViewsLast post 10/26/15, 3:47 PM by Jim in Milton, Ont. -
hydraulic/bottle jack question
by Jerry Gibbs 10/22/15, 9:56 PM
3 Replies · 26 ViewsLast post 10/24/15, 10:50 PM by Pete in Holland MI -
by Rick Snyder 10/22/15, 8:17 PM
11 Replies · 40 ViewsLast post 10/24/15, 11:50 AM by Ellis Walentine -
by Doug 10/23/15, 1:28 AM
2 Replies · 23 ViewsLast post 10/23/15, 1:28 PM by Larry Clinton At Frankfort, (Central) Indiana -
WC Weekend Accomplishments....
by Dennis E Peacock 10/19/15, 1:49 PM
15 Replies · 35 ViewsLast post 10/22/15, 6:30 PM by John in NM -
by Terry Alexander 10/21/15, 9:48 PM
11 Replies · 61 ViewsLast post 10/22/15, 3:44 PM by Jerry Nicholson -
by Jim Hoeller 10/19/15, 10:37 PM
11 Replies · 34 ViewsLast post 10/21/15, 9:48 PM by Grant in Iowa -
by mdclor 10/19/15, 12:30 PM
4 Replies · 60 ViewsLast post 10/21/15, 9:26 PM by mdclor -
by Chuck in Mtl. 10/12/15, 11:16 AM
15 Replies · 72 ViewsLast post 10/21/15, 1:25 AM by Joe shelton -
by Bill Tindall, E.TN. 10/20/15, 1:12 PM
11 Replies · 45 ViewsLast post 10/20/15, 11:13 PM by Mark Mandell -
by Mark Trenier 10/19/15, 9:29 AM
3 Replies · 34 ViewsLast post 10/19/15, 10:06 PM by Jim O'Connor -
by David Frame 10/19/15, 8:10 PM
0 Replies · 42 ViewsLast post 10/19/15, 8:10 PM by David Frame -
by Ellis Walentine 10/18/15, 4:23 PM
4 Replies · 30 ViewsLast post 10/19/15, 3:12 PM by Tom Pilsbury (Chicago) -
Do LED 's strobe or flicker? 2
by Barry Irby 10/10/15, 10:25 AM
30 Replies · 76 ViewsLast post 10/18/15, 9:23 PM by John McGaw -
Demilune table question, with a drawer?
by Bill Tindall, E.TN. 10/6/15, 12:21 PM
15 Replies · 64 ViewsLast post 10/18/15, 6:32 PM by Brian Holcombe -
Using Plunge bits for Faux raised panel look in M
by Mark 10/15/15, 7:50 PM
6 Replies · 37 ViewsLast post 10/16/15, 9:11 PM by mdclor -
by McKay 10/16/15, 3:30 AM
10 Replies · 124 ViewsLast post 10/16/15, 7:46 PM by Sgian Dubh -
by andrew nistock 10/15/15, 2:57 PM
10 Replies · 48 ViewsLast post 10/16/15, 3:21 PM by John in NM -
Building a garage/shop at my parents house? 2
by Charles Jackson III 10/12/15, 2:00 PM
28 Replies · 136 ViewsLast post 10/16/15, 2:41 PM by Joseph Mulherin -
by BillP 10/14/15, 12:11 AM
17 Replies · 40 ViewsLast post 10/15/15, 11:14 AM by Barry Irby -
Foolproof sharpening of card (cabinet) scraper
by Derek Cohen (in Perth, Australia) 10/11/15, 4:28 PM
17 Replies · 107 ViewsLast post 10/14/15, 5:36 PM by William Duffield -
by Dustmaker Mike 10/13/15, 9:40 PM
14 Replies · 52 ViewsLast post 10/14/15, 1:42 PM by John in NM -
[AD] Klingspor's 15th Annual Extravaganza!
by Ellis Walentine 10/13/15, 7:29 PM
0 Replies · 37 ViewsLast post 10/13/15, 7:29 PM by Ellis Walentine -
WC Weekend Accomplishments....
by Dennis E Peacock 10/12/15, 4:13 AM
3 Replies · 31 ViewsLast post 10/13/15, 4:50 PM by Jerry Roberts -
by Stuart Johnson 10/11/15, 7:17 PM
19 Replies · 55 ViewsLast post 10/13/15, 1:01 PM by Stuart Johnson -
by Terry Alexander 10/10/15, 2:55 PM
7 Replies · 51 ViewsLast post 10/13/15, 4:40 AM by John K Jordan -
by Tom Dunlap 10/12/15, 2:20 AM
1 Reply · 31 ViewsLast post 10/12/15, 11:50 PM by ben d.



