Not much to report on this week as I've been working a great deal at the day job as well as trying to just relax and do much of nothing over the weekend. Do you ever have one of those weeks where you've pushed and done so much that when the weekend shows up that you don't feel like doing much of anything? Yea, that was me going into this past weekend. The good news is that I'm off work all week this week and my hope is to get several things done around the house to include my guitar project and my daughter's blanket chest that she and I started last year. Seems like the older I get the faster time flies.
That's it for me, so what did YOU do this past weekend?
Highland Woodworking Demonstration by Roy Underhil
Matt Robinette,Mt Juliet TN
Had a great Sunday at Highland Woodworking down in Atlanta. I attended Roy Underhill's one day joinery demonstration. Roy has a three foot long Lie Nielsen dovetail saw that was fun to watch him cut dovetails with. Of course I went all Fan Boy and had him sign my copy of Calvin Cobb Radio Woodworker and the picture to go with it. It was worth the four hour drive.
Still cleaning up after the flood here. I think I've gotten the rust under control, thanks to WD40, steel wool, elbow grease and paste wax. I keep finding little messes to clean up or toss in the trash, but they are getting fewer and farther between, thank goodness. Most of my tool and storage drawers swelled with the moisture and stuck. I spent most of the weekend emptying them and planing them down so they slide open and closed properly. I know they will dry and shrink over the winter; but they were snug to begin with, so planing them down won't cause problems when they finally dry out. Plus, I'll be ready for the next 1,000 year flood. I hope to be back building furniture by the end of the week.
I visited a new woodworking store in the Orlando area. Actually its in a small town just north of there. Its called Altamonte Springs and the store is called Rockler. Talk about big. Its way larger than Woodcraft and it is really nice. Didn't buy anything yet but I told them Id be back. Getting the mortices and tennons ready for my cypress gate. Lots of fun.
I attended a meeting at the shop and barn of a professional cabinet maker. For starters, the shop had at least five of these attached to various benches.
Then we were taken to an undisclosed location. This is a very small part of their collection of mahogany crotches and huge slabs of other highly figured wood.
There is no way my photos did justice to this stock of materials, especially since I left my spare camera batteries in the van.
Returned late Saturday night from being in Virginia for eight (great) days.
Seems like we drove all over the state from Blacksburg to Williamsburg and back.
I love Williamsburg. Hardly anybody there and weather was absolutely perfect. Couldn't have been any better. It's usually hot and humid and full of people when we are there.
I tried to meet up with David Yoho, but it just didn't work out this time. Maybe next trip. Sorry David. I was so close too...
I hired a live-in farm sitter and drove to the Outer Banks to a house on the ocean. It's a terrible job but someone has to do it. Spending some quality time this week with the grandchildren and the chip carving knives.
Yes, there's always next time. We'll be looking forward to seeing you then. And, yes, the fall weather was and has been nice here. Glad you had a good trip.
I just picked up a piece of figured Makore to use along with the cherry and maple for the bedroom furniture project I have going. The board is 6-feet long by 12-inches wide by 1 3/4-inches thick. Going to do some slicing and dicing to make accent parts for the headboard and dresser.
We go down every year. This year twice - second visit was early September. It's beautiful there in September and October without the crowds of the summer months. Enjoy you stay!
We close on our river cottage on Friday. I think our OBX visits will shrink going forward. While it's not the same, it's still a relaxing place to get away and for us it's closer.
I am selfishly tempted to NOT recommend this area to people - there were certainly fewer people 37 years ago when we started coming here.
October is my favorite time; July my least favorite. December is great for surf fishing and often surprisingly warm due to the water temperatures. I mostly stay in Avon or further south.
It's a 12 hour drive for us (the way I drive) so these days we make it a relaxing 2-day trip.
Absolutely - no point in encouraging any more folks to go.
We either stay in Avon or all the way up the other end in Corolla. We always stop by Buxton Seafood when we're there.
We started going down 10 years ago. Last time we were in Avon was 2012/13 in December. We're coming in from VA so it's about 3 to 3 1/2 hours to Kitty Hawk. Then from there to Avon is about another hour and 20 minutes. It's a beautiful place in the off season and like they say - "a bad day at the beach is still better than a good day anywhere else!"
William,Woodcraft is located in Fern Park on 17-92. They moved there a few yrs ago from Semoran. Rockler is on 436 in the same block as Florida Hospital .It is located east of I-4 and west of 17-92. 515E Altamonte Dr. suite 1018, Altamonte Sps. Fl.
I'll make sure, next time I try to go there, that I enter their address in my Magellan, instead of trying to find them from memory. I don't know if I will be able to find a good excuse to visit them the next time I'm in Florida or not. I never can tell when family might need me to do something woodworking, and I've left critical tools or supplies at home. The last time that happened, I was stuck using a Minwax product from the Orange Borg.
Really we started earlier, once I got the Byrd head installed in the planer, but this weekend we started removing damaged 2x6's and replacing them. Turns out spruce under ipe rots nicely even in the desert, not surprising in retrospect given ipe's brick like texture.
Last day (tuesday for me) we poured about a yard of concrete to replace 3 steps on the back of the porch. Got a willing neighbor to come over and help, which turned out to have been crucial - we finished about 20 minutes before it started raining/hailing (1.4" total in about 2 hours)!