Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Rant

Posts

Rant

#1

Rant

Jim Hoeller

I bought a Ridgid R4330 Planer (three blade model) about five or six years ago and it had been giving good service. I swapped blade edges the other day and apparently the spring on the right side of the hold down got into the threaded hold down hole of the shaft. There was no indication of a problem when I tightened the bolt until I turned the planer on. The bolt came loose and stopped the planer. The hold down bar was bent. I removed it, the blade and the other two blade/hold down assemblies and turned it on to see if the shaft had been damaged. Thankfully it had not. Unfortunately the hold down bar on the machine is now obsolete according to Ridgid and not available. I found an alternative (I hope) on the web. Apparently the manufacturer accepts no responsibility for parts after the sale of equipment. I will never buy a Ridgid tool again and Home Depot has lost a customer as well.

Re: Rant

#2

Opposite Result

Mark Mandell - Gone Round In New Jersey

Bought a Ridgid oscillating spindle/belt sander. 3 years later the oscillator gear went south. Took it to a Emerson/Ridgid shop about 2 hours from me. They replaced both the motor and the gear, free, no charge, and delivered it back to me.

I also bought their 18v drill & driver set since the batteries are guaranteed for life so I don't have to buy another dril for the price of new batteries.

Were I you, I'd get on to Ridgid/Emerson customer service again.

Re: Rant

#3

Battery caveat...

John in NM

The batteries that come with the drill or driver are covered by the lifetime service agreement, if you register everything correctly within the allotted time.

Additional batteries are only covered for 3 years if I remember correctly.

Not to say it's not still a great warranty, just that it's not a blanket, all batteries forever type of deal.

I've been trying to register a drill/driver set the last two days and it keeps kicking me out, claiming my email address is invalid even though I've registered using it before. I suppose I may have to call them up tomorrow.

Re: Rant

#4

Re: Opposite Result

Jim Hoeller

I appreciate your posting and visited Emerson's Ridgid tool web site. I could not find a page that related to the power tools sold at Home Depot. Selecting "Power Tools/Air Compressors" led me to a page for electronics. I'm not unfamiliar with computers having used and operated some of earliest varieties in the sixties. I have also been using the internet for many years and can distinguish between user friendly web sites and those that seemed designed to frustrate. I have since found a source for the replacement parts I need and will buy them.

Re: Rant

#5

Re: Rant

TomD

Not dealing with home depot would be to cut my nose off to spite my face, in my case. There re other suppliers, but I need to keep them all in the loop.

Speaking of them, I rented a chipper from them. Didn't work, called them up to say the blades were dull. They came out 35 miles to replace the blades and get it back running again:

1) We asked about the blades, and were told they were sharp when we picked the machine up. But on the flip side, only real woodworkers know sharp (well obviously similar trades). The rental people seemed well trained and courteous , but there are limits to what you can expect. For instance maybe they tested it with some log, we were in part milling dried oak that was lying around from the previous summer. I don't think the average dude is going to know how all the trees in the forest chip, and which are on our property. That said there were some divots in the blades.

2) They reset the clock when they had the machine fixed, which was great, but it totally screwed up the plan we had to return it that day, and have date night, which in the wife and I's case comes about once a year, and we had other things relating to my aging parents worked out that we had to put off. They couldn't know, but a good deal isn't always a good deal for everyone.

3) Mainly, the fact they came all that way out to deal with our problem meant that we didn't have to be irate customers who drove 140 miles to borrow a machine we couldn't use and to return it asking for a refund looking like we were dishonest and trying to take them for the rental. On the flip side, they didn't look like they didn't care and were taking advantage of us and messing us over.

Overall, it could have worked out better, but I was very pleased with the effort they made to get us into the game, and preserve the relationship in such a way that none of us would end up looking like we had dishonourable intentions. So overall a gold star.

One thing I have noticed is the mags often give Rigid tools top billing. For instance I was looking at a recent spindle sander review. The Rigid got top marks by a long measure in part for a variety of less important factors like 1) dust collection; 2) usability of the table; 3 bit changing; non-spindle functions. Don't get me wrong, these are all great, but not if the basic machine sucks or breaks down. For instance something like a more usable table came about due to offset of the spindle, well maybe there is a mechanical reason the spindle is better centrally. I have no reason to think there is anything incorrect about the assessment, but I have wondered about these rapturous reviews for machines that may not really be so good in the long run. I remember their planer getting top marks, and at the time they were the first, or maybe one of the first with a 13 vs, a 12.5. Well we all want 13, given the choice. But the fundamentals are still the main issue.

Re: Rant

#6

Re: NO MORE Ridgid tools EVER for me!

Larry Clinton At Frankfort, (Central) Indiana

Long saga: Five or six years ago before all the horror stories, due to the "lifetime" tool and "battery" warranty, I decided to purchase both a Rigid drill and impact driver at Home Depot. As my son helped me (did most of the work) build my shop and we share it, I purchased the tools for him. I am now 74 and he is in his 40's so it made sense to give him the tools and the warranty. It was with great difficulty that I finally got the warranty registered in his name. I purchased the tools and an extra heavy duty battery for each tool at the same time. After about 3 months the Rigid website finally listed all the tool and batteries.

Well about 2 or 3 years ago all the batteries finally gave up the ghost. After researching how to get the batteries replaced or repaired, I found a lot of conflicting information. Some said you have to take them to a Rigid repair location (nearest one to me is 50+ mile away).

Supposedly any HD store that rents tools can replace the batteries on site. After procrastinating for a couple of years I finally contacted the nearest HD store (Lafayette, In.). The customer service rep (I believe his name was Joshau). He stated that if I would bring the batteries, chargers and tools in for my son that he would send them in THAT DAY and have them replaced and sent to my home, sounded great. So I took the tools, batteries, the original receipt, the warranty registration letter and tag etc. all to the store (about a 20 mile drive). This was either late spring or early summer.

About a month later I called as nothing had appeared at my home. I was told to WAIT as it was normally a 4 to 6 weeks return. OK, so I waited until 8 weeks had passed and called again. Guess what ~ no Joshau worked there any more as he had moved to Alaska!

So another HD customer rep did a search and found the batteries were still at the store! She said she would call the service center and take care of the problem. Well a few days later I called back to see when the batteries would be returned. She said the Rigid service center said my son would personally have to make a call to Rigid, as I was not the registered warranty holder. So I had my son call, the service center rep asked which store was handling the battery warranty, so my son told him the Lafayette store. He said he would contact the store and have the batteries replaced, BUT that the heavy duty batteries were not part of the tool set so they would not be covered!

I waited another week or so and called HD again, ~ seems like they were never called by Rigid. So she called Rigid, they said they had no record of my son calling. So he has to call again. At this time the HD rep. said they were going to "LET" us handle the issue as it was between my son and Rigid. I had a discussion with the store manager, and told him I was disgusted with the Rigid issue and their handling of the problem. He stated they just "sold the tools" and had no responsibility as to the warranty, even though their rep told me they would take care of it. He seemed to feel he had no responsibility for his prior employers actions. I stated I would post the problems I have had on every web site I could find so others would know of the lousy service. At this time I will never purchase another Rigid tool nor any item from Home Depot!

By the way the batteries are still at the HD store, as my son has been working 12 hours a day I am not sure if he has contacted them again.

I spent between $300 and $400 for the tools and batteries and it will be the last cent they get from me.

Re: Rant

#7

I have used the warrenty successfully

Bill Tindall, E.Tn.

I sent the batteries to the service center and they sent me back new ones and they paid the postage.

Do remember to reregister the replacements to extend the warranty.

Re: Rant

#8

I'm beginning to regret the purchase...

John in NM

Warranty sucked me in, and now I can't register online. Got a sales rep reply to an email right away, but she appears to be speechless in response to technical details. Kind of disappointed in them, I have to admit.

Re: Rant

#9

Re: Rant

Jim Hoeller

The alternative was no longer available from two of the Ridgid parts outlets.

Re: Rant

#10

Re: Rant

Daves Not Here

While Techtronic Industries (TTI) technically only owns the rights to use the RIDGID name they do manufacture, sell and support many of the tools that bear that name. Here is a listing of some of the other TTI owned companies that could be added to the your boycott list along with HD and RIDGID; Milwaukee Electric Tools, AEG, Ryobi, Homelite, Empire(levels), Stilleto(hammers), Hart(hammers), Hoover, Oreck, Dirt Devil, and VAX.

Re: Rant

#11

Supposedly a new process is now in place *LINK*

Dick Coers

I got an email from them last month, saying registration has never been easier. It said that no more mailing in receipts! I'll forward the email if anyone needs it. Posting the link they gave me for the new process


https://register.ridgidpower.com/sign-in

Re: Rant

#12

Re: Rant

Grant in Iowa

Wow. that is an enlightening list. I have been unhappy with many of those names in the hand held power tool market. I used to like Milwaukee, and still like their corded tools, but they hosed me on battery issues too many times of late. I finally moved over to DeWalt for cordless tools.

FWIW,

Grant in Iowa