Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

What is this for?

Posts

What is this for?

#1

What is this for?

Terry Alexander

Here is a pick of the table of my Craftsman 15 1/2" drill press. I kind of inherited it. Had been left in a shop that had a leak. Anyway...I have it all shiny and restored now. But for the life of me, I can't think of what is supposed to be mounted on the "kind of" back side if the drill press table. Here is the pic.


Appreciate y'alls assistance.

Terry Alexander in West Texas

Re: What is this for?

#2

Re: What is this for?

Thomas Skaggs, Foothills of Mount Level

I assume it is for a handle that would screw in and tighten the table to the riser tube.

T

Re: What is this for?

#3

Re: What is this for?

John McGaw

Does the unseen part of the table have a locking mechanism to fix it to the upright? If so then it isn't likely to be for locking. Is the hole threaded? If so, might the hole be for mounting some sort of tilting table since I see that your main table is fixed?

Re: What is this for?

#4

Re: What is this for?

andrew nistock

if I remember correctly this may be where you attach part of the mechanism for a rack and pinion lift system. Not sure but I cannot find the manual for mine. bought mine 35 short years ago.

Andy

Re: What is this for?

#5

Re: What is this for?

Roy Girolami

I had a similar drill press years ago. Sears sold an auxiliary table that could be tilted. It mounted on that boss with a bolt through the hole.

Roy

Re: What is this for?

#6

Add on lift mechanism maybe?


Re: What is this for?

#7

Never knew this until replies

Gary Smyth



Tilt table as per John and Roy. Not the bicycle chain table lift connector as I thought. I have two of this drill press and never knew about tilt option.

Re: What is this for?

#8

Re: Never knew this until replies

TomD

Interesting option, never seen such a thing.

Re: What is this for?

#9

Exactly

Rod Peterson—Ormond Beach, FL

I bought one in the '70s for my circa 1972 Craftsman DP. It wasn't nearly as useful as I'd hoped. In fact, I'd be hard pressed to recall ever using it.

I also had the chain lift for my DP. While helpful, it had a design flaw that made it a little irritating to use. Can't remember details, now, as I've been well and truly rid of it (the DP) for nearly a decade.

Rod

Re: What is this for?

#10

Re: Never knew this until replies

Joseph Mulherin

Try looking into Rockwell tools. They have the lifetime supply on their batteries.

Re: What is this for?

#11

I know what I would use it for

Ralph Lipeles

Looks like a good place to screw in a bolt so that you could attach a flex cable going up to a top mounted pulley and then down to a counterweight. A counterweight makes it significantly easier to raise the table.

Re: What is this for?

#12

Re: What is this for?

Jerry Nicholson

I have had a Craftsman DP with this tilting table "feature" since some time in the late 60's or early 70's. I bought the tilt table but I don't think I ever used it. I think maybe I threw it away sometime in the last 15 years.

My DP still uses a repurposed sump pump motor.

Jerry