Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Do LED 's strobe or flicker?

Posts

Re: Do LED 's strobe or flicker?

#26

Kinda makes you wonder....

John in NM

We all know the drill with cordless drills (sorry, had to do it :D )....

Two new batteries cost about 75% of a whole new set.... wonder if they're including a good charger with the sets or just letting the very basic one kill the batteries after 18 months. Heads they win, tails you lose.

I don't want to believe manufacturers would do that, but then we also all know that 2x4's and plywood keep shrinking and that HP ratings on air compressors are absolute BS....

Re: Do LED 's strobe or flicker?

#27

chargers

Bill Tindall, E.Tn.

The drill manufacturers are in a bind on chargers. Workmen on the job want them to charge fully and fast, under any working condition. The battery would like slow, at modest temperature, and only charge and discharge in the mid range of capacity. What to do?

During charging more than electrons move around. Once that electron leaves, or arrives, at its respective pole a significant amount chemistry occurs and atoms must rearrange back to the solid state where they need to be. The electron transfer is instantaneous; the sold state atom gyrations aren't, especially so in a Li-ion battery.

A seldom know fact is that the Prius car battery operates in a narrow range of charge +/- 50%. This narrow range is to preserve battery life under the adverse conditions it must operate. The result is an underpowered gas engine(for fuel economy) with a temporary battery boost for acceleration. It's a clever concept with a boggling amount of hardware and software to support it.

Re: Do LED 's strobe or flicker?

#28

Not surprising....

John in NM

The reasonable answer is much more plausible and much less entertaining than the paranoid delusional one! :D

Re: Do LED 's strobe or flicker?

#29

Longest OT ever, for me

Barry Irby

This is the longest surviving OT post I ever posted. I expected a yes or no answer. Not five days of detailed discussion, most of which I don't understand. I know nearly nothing about electronics. Knew LED stood for Light Emitting Diode but since I don't know what diode is or does it might as well have been Low Energy Doofus.

Thanks for the effort and the help. I am thinking the answer Yes, and maybe some of us can see it under some circumstances.

And, I agree with JKJ, the flashing mode is stupid and nearly embarrasses me on the the other flashlight I use on inspections. One click turns it on, but it takes three to turn it off. Tedious and its wearing out the switch. If you don't click at the right rate, it stays on flashing. Looks silly. And if someone were attacking me, I might run, but would never think to do the little clicky routine on my flashlight.

Re: Do LED 's strobe or flicker?

#30

Re: Longest OT ever, for me

TomD

Yeah, tactically in a fight I would just rather hit him with the serrated crown. I have one light were a minor depression skips to the next format, and one does not have to click through. I have never ponied up for a surefile light, I hope they just go to flood.

I guess the flash is good for signalling, and uses less battery. They make bike lights with lots of modes, one of which is a flash with low light setting so you can continuously see the road, while making yourself visible, and possibly giving yourself a seizure.

Re: Do LED 's strobe or flicker?

#31

Re: I've been reading.... *LINK*

John McGaw

There is more than one reason to use pulsed drive to an LED. Sure, it is used to minimize the average the current without a power-wasting current-limiting resistor but it also makes them look brighter to the human eye. Anybody who designed multi-digit LED displays in the olden days (remember calculators and clocks with LED 7-segment displays?) came to realize that you could sequentially drive the heck out of each digit and make them look brighter than they should have considering the on-off durations while simultaneously reducing the component count. That came as a real revelation to me in the 70s in Silicon Valley.


Pulsed LEDS Look Brighter