Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Latta tapered leg jig

Posts

Latta tapered leg jig

#1

Latta tapered leg jig

Bill Tindall, E.Tn.

Once again! I see things in a demo or class that I figure I'll never use and don't pay attention. And then.....

I attended a class with Steve and his table saw tapering jig was there and I thought "I'll never use that". Well now I wish I had paid more attention. Does anyone have a picture of it? All I remember about it was that it worked well.

Re: Latta tapered leg jig

#2

Re: Latta tapered leg jig

Joe in a Cleveland suburb

It might be the one in Fine Woodworking #229, pp. 30-35 September 27 2012

Re: Latta tapered leg jig

#3

Curious...

John in NM

Tapering jigs are trivially easy to make from scrap wood. I tend not to save them or go to the trouble of making adjustable ones because it is just so easy to screw three scraps together in the appropriate geometry for the task at hand.

I would be interested to see a tapering jig worth keeping around after use, though be forewarned of some very active skeptical thinking :D

Re: Latta tapered leg jig

#4

Re: Latta tapered leg jig

Chuck Kettler

I thought you always tapered at the jointer?

Re: Latta tapered leg jig

#5

details to follow

Bill Tindall, E.Tn.

I'll comment on the legs and the means to taper them when they are successfully finished.

Re: Latta tapered leg jig

#6

Re: Latta tapered leg jig

TomD

Yeah jointer and hand plane. Jigs are for production, 4 legs once in a lifetime or so, don't qualify, but Bill seems to be in the multiples game at times.

http://www.finewoodworking.com/item/57429/see-it-in-motion-tablesaw-leg-tapering-jig

There seem to be many google references, and the above link may be a video of it. Basically seems to be a jig with toggle and enough space not to cut your hands off. And adjustable fence. The latter is probably not worth it unless you make tons of them. FWW 229, I think was mentioned. FWW has an index.

Actually the whole thing is pretty much identical to this little jig I made to cut wedges for wedged tenons in a bookcase. It used a piece of ply large enough not to cut ones hands off, a destaco to hold the wedges in place, and a cool little rotating thing to arc the top of the wedge. The thing with jigs is to have the common sense to make your own for anything that comes up. It's a workstyle, if I had to wait for some big name guy to invent a jig I would never get anything done. You really see this in activities like guitar making, where there for sure big name jigs, normally there really are pretty amazing though, but there are so many other jigs you just have to be able to come up with whatever works in you specific case.

Re: Latta tapered leg jig

#7

Re: Latta tapered leg jig

William Duffield

I built one. It's the only table saw based leg taper jig I'm not scared of.

It has a few modifications vs. Steve's, which you should be able to pick out by comparison to the one at the bottom of this message.


It's designed to accept two different types of toggle clamp, and will also mount a De-Sta-Co toggle clamp.


Mine has a tote, which serves the same function as the block of wood on Steve's. It is not glued down, and as you can see, I did a fine adjustment on its location. The clearly labeled sharp thing is a flat head wood screw. It goes all the way through the stop block.


If these are not sufficient, I can process a few more.

This one is original. Steve Latta built it himself.


Re: Latta tapered leg jig

#8

Re: Latta tapered leg jig

Hank Knight

I find taper jigs to be way too much trouble, unless, like TomD sys, you're in production mode. I rough cut the taper on the band saw and handplane to the lines. Slight variations from leg to leg are not noticeable. Simple, quick and easy.

Hank

Re: Latta tapered leg jig

#9

Alternative

Mark Mandell - Gone Round In New Jersey

Have done several such jigs over the years.

9' long to do this

But for furniture I use a sled and the planer to cut carefully controlled tapers such as


or


or


Using the sled and carefully cut blocks, you can "cut" precisely tapered legs. You need "trap" blocks at both ends so that the stock stays centered on the sled, but the option is to taper 2, 3 or 4 faces with the same jig.

Re: Latta tapered leg jig

#11

thanks folks

Bill Tindall, E.Tn.

thanks folks.....I have the information to proceed