General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
Finishing Very Curly Soft Maple
by Roger T 1/3/11, 2:40 PM
6 Replies · 42 ViewsLast post 1/6/11, 2:58 PM by Roger T -
by Gary Kittleson 1/5/11, 5:43 PM
9 Replies · 26 ViewsLast post 1/6/11, 3:28 AM by Mark Mandell - Gone Round In Jersey -
OT- reflecting on obsolete items 2
by Dave Paine 12/31/10, 8:39 PM
36 Replies · 74 ViewsLast post 1/6/11, 3:12 AM by Galen Vetterick -
by Ray 1/5/11, 3:54 AM
3 Replies · 21 ViewsLast post 1/6/11, 1:39 AM by Ray -
by Todd Nebel 1/3/11, 9:24 PM
16 Replies · 55 ViewsLast post 1/6/11, 12:18 AM by Todd Nebel -
by Donn 1/3/11, 4:28 AM
4 Replies · 13 ViewsLast post 1/5/11, 7:05 PM by Donn -
by John Lucas 1/4/11, 4:06 PM
12 Replies · 35 ViewsLast post 1/5/11, 6:06 PM by George -
Damaged My Freud Ultimate Cutoff Blade
by Steven Bellner 1/5/11, 1:54 AM
3 Replies · 32 ViewsLast post 1/5/11, 2:14 PM by Jesse Cloud -
by mike 1/5/11, 3:51 AM
3 Replies · 19 ViewsLast post 1/5/11, 1:57 PM by Ken Krawford -
by William Collins 1/3/11, 9:28 PM
10 Replies · 30 ViewsLast post 1/5/11, 1:28 PM by William Collins -
by Todd Nebel 1/3/11, 12:54 AM
15 Replies · 30 ViewsLast post 1/5/11, 12:19 PM by Jim DeLaney, Austintown, Ohio -
by Scott in Montana 1/5/11, 3:02 AM
2 Replies · 22 ViewsLast post 1/5/11, 5:42 AM by Scott in Montana -
gluing drawer technique to ensure it fits
by Bill Tindall, E.TN. 1/4/11, 10:11 PM
3 Replies · 16 ViewsLast post 1/5/11, 3:53 AM by Bill Tindall, E.TN. -
Question: Securing Coffee Table Slats
by Bob S 12/31/10, 5:34 PM
6 Replies · 53 ViewsLast post 1/5/11, 2:05 AM by FredD -
by Bill Tindall, E.TN. 1/3/11, 11:36 PM
4 Replies · 13 ViewsLast post 1/4/11, 10:19 PM by Bill Tindall, E.TN. -
by Tony - Memphis 1/3/11, 7:43 PM
2 Replies · 18 ViewsLast post 1/4/11, 8:25 PM by jcousins -
by mike 1/3/11, 2:42 AM
2 Replies · 33 ViewsLast post 1/4/11, 5:52 PM by Kelly -
I've been busy since Christmas
by Paul Kramer 1/2/11, 11:28 PM
5 Replies · 48 ViewsLast post 1/4/11, 4:13 PM by John E in SC -
by Stephen Shepherd 1/4/11, 1:19 PM
0 Replies · 29 ViewsLast post 1/4/11, 1:19 PM by Stephen Shepherd -
by Gerry In North Surrey 1/3/11, 4:04 AM
4 Replies · 29 ViewsLast post 1/4/11, 12:40 PM by Terry Hatfield -
by David Yoho 1/3/11, 2:46 PM
14 Replies · 34 ViewsLast post 1/4/11, 11:04 AM by David Yoho -
Best primer for painting wood & hardboard
by Tim Greif - West of Chicago 1/3/11, 9:01 PM
3 Replies · 30 ViewsLast post 1/4/11, 6:43 AM by FredD -
by Steven Bellner 1/2/11, 7:13 AM
5 Replies · 27 ViewsLast post 1/4/11, 4:50 AM by Steven Bellner -
by John M in Mid Mich 1/1/11, 4:28 PM
35 Replies · 77 ViewsLast post 1/4/11, 4:08 AM by Bill Tindall, E.TN. -
Need some aluminum bushings made
by Joe Pack 1/2/11, 11:18 PM
4 Replies · 32 ViewsLast post 1/4/11, 4:00 AM by Joe Pack -
by james runchey 1/3/11, 11:40 PM
2 Replies · 13 ViewsLast post 1/4/11, 2:40 AM by John Veerkamp -
by Woodie49 1/3/11, 4:12 PM
4 Replies · 31 ViewsLast post 1/3/11, 10:10 PM by Keith Newton----Little Rock, Arkansas -
WC Weekend Accomplishments....New Years Edition
by Dennis E Peacock 1/3/11, 1:28 PM
3 Replies · 19 ViewsLast post 1/3/11, 10:01 PM by Dale Lenz -
by Bill Tindall, E.TN. 1/2/11, 5:26 PM
7 Replies · 50 ViewsLast post 1/3/11, 6:51 PM by Dave Bair - Eaton Rapids -
Filling Pores on Oak w/WB Poly
by Bob S 1/3/11, 2:46 PM
4 Replies · 27 ViewsLast post 1/3/11, 6:14 PM by steve mackay



