Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Question: Securing Coffee Table Slats

Posts

Question: Securing Coffee Table Slats

#1

Question:  Securing Coffee Table Slats

Bob S

I have one inch wide, by 3/8" thick slats running across the shelf of my coffee table. They sit in a notch (rabbet?) cut into both the front and the back rails. Also, there is a crossmember support running under the center of the slats. I need to fasten the slats down, and am considering simply gluing them in place. The entire table has all joinery hidden. I am hoping there is an alternative to give these slats a little more durability, as I imagine them popping up some cold winter morning, or some hot summer afternoon....

This should be my last question on this project, thanks for the help.

Bob S

Re: Question: Securing Coffee Table Slats

#2

Clint Searl

Re: Question:  Securing Coffee Table Slats

Clint Searl

Don't overwork the problem. If they are well fitted and seasoned, a dab of silicone adhesive-caulk will secure them to the side and center rails.

Clint

Re: Question: Securing Coffee Table Slats

#3

Re: Question:  Securing Coffee Table Slats

Mark Mandell - Gone Round In Jersey

Bob, from your description these are loose and can slide along in the slot. You can use Clint's suggestion, and you can also use the caulk to "glue" spacers between the slats to keep their spacing even.

Re: Question: Securing Coffee Table Slats

#4

Caulking for adhesive?

Bob S

Really, this sounds too good(easy) to be true.. You mean like Silicone caulking in the tube?

Cant use the spacers as they would not do it aestetically(sp?).

What about contact cement or wood glue? Except the parts have shellac finish and or water poly(I chose to finish beforevinstalling slats)...

Re: Question: Securing Coffee Table Slats

#5

Re: Caulking for adhesive?

Dave Paine

Some caulks can work as adhesive. I can attest to how difficult certain caulking can be to remove from objects. :D

Benefit is a flexible joint. I would not expect contact cement to last long. Tends to dry out and become brittle, and then the small contact area would be likely to break.

Another option is Weldbond. Should be found at hardware stores, big box stores. White when applied, dries clear. Flexible joint. Many uses.

Re: Question: Securing Coffee Table Slats

#6

Re: Caulking for adhesive?

Mark Mandell - Gone Round In Jersey

Yup. Clear silicone in the tube. Little dab in the slot on each side of each slat (not needing to embed the slat in goo) and you'll be fine.

Re: Question: Securing Coffee Table Slats

#7

Re: Question:  Securing Coffee Table Slats

FredD

If you have already completed the Coffee table , here is a tip that will save you time and swearing.

Adhesive caulk has many uses and the one I use PolySeamSeal is superior to Silicone for a couple of reasons.

One , it forms a stronger bond, fact is , you want to be sure your not going to remove anything you bonded with it, since that guarantees something will break before the Caulk does.

Two, it cleans up with water , not messy like Silicone and has a fast tack .

Also you can paint over it no problem , unlike Silicone which does not accept paint.

Comes in colors and clear, I keep some Clear and Bright White on hand.

FredD