Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Tool Cabinet Project

Posts

Tool Cabinet Project

#1

Tool Cabinet Project

Todd Nebel

I finally got around to building myself a "nice" tool cabinet. Let me tell you it takes a while and some planning to get it to this stage. I'm still adding little touches here and there as tool holders. The middle shelf is adjustable and I hope to replace it all together with bench planes standing semi-vertical.

Behind the clock is where I store the router bits. There's a pull-out shelf at the bottom for the coffee mug and miscellaneous tools to keep them off the bench during work. The pocket drawers are actually empty (for now).



Truth be told I removed the less photogenic items from the middle shelf like glue bottles, rolls of tape, WD-40, etc. The case is red oak (with some nice tiger striping) and the rest is spalted sycamore. It's hung on the wall with a cleat from end to end. Happy to answer questions if there are any. Otherwise, thanks for viewing.

Re: Tool Cabinet Project

#2

Re: Tool Cabinet Project

Craig in Silverdale

That is a really nice tool chest. I'm not certain I'm that organized. I also see you use the fast cap tape measures. I like them myself. again, you did a wonderful job.

Re: Tool Cabinet Project

#3

Wow! Great Job!

mdclor

I think anyone would be proud to have that hanging in their shop.

Re: Tool Cabinet Project

#4

Ellis Walentine

Excellent. I'm envious.

Ellis Walentine

Re: Tool Cabinet Project

#5

Re: Tool Cabinet Project

FredD

Well thank you for showing it Todd, nice job.

I think the clock is a nice touch and helps keep the work moving along . ;-))

FredD

Re: Tool Cabinet Project

#6

A somewhat different perspective

Bruce, a MN Galoot

First, you've done a really nice job with both layout and wood choice. I'd be glad to have that hanging on my shop wall. Hell, I'd be glad to have that hanging on my living room wall. :D (my wife might have different ideas)

The different perspective is that since this nearly entirely a hand tool chest, please post it on the quiet side so more of your fellow hand tool denizens can benefit from your work!

Very good work!

Re: Tool Cabinet Project

#7

Re: Wow! Great Job!

Larry in NW OHIO

That would be to nice to hang in my shop. :D :D :D Larry

Re: Tool Cabinet Project

#8

Great work !  The nicest tool cabinet I've seen.

Yonak

Re: Tool Cabinet Project

#9

FastCap ProCarpenter R/L

Todd Nebel

Yeah I like it better than the standard Stanley Powerlock. I like the black on white and numbered 1/16 increments.

Re: Tool Cabinet Project

#10

Re: Tool Cabinet Project

Todd Nebel

Lets me know when to head upstairs and ask my wife if lunch is ready. Which happens to be her favorite question from me other than what's for dinner :D

Re: Tool Cabinet Project

#11

Re: A somewhat different perspective

Todd Nebel

Hi Bruce, I figured most people toggle between the two. Am I off base on that assumption?

Re: Tool Cabinet Project

#12

Yup

Bruce, a MN Galoot

there are quite a few on the hand tools side who read that forum only.

Re: Tool Cabinet Project

#13

If that was in my shop, I'd never get work done

Bill Houghton, Sebastopol, CA

I'd be too busy admiring it.

Beautiful work. Closed, the center looks almost Japanese, although that may be the arrangement of brushes and things on the shelf.

Re: Tool Cabinet Project

#14

Re: Tool Cabinet - That's ridiculous!

Ray Carson - Lawrenceville, NJ

in a good way. :)

My wife would laugh at me, or go the other way and ask why we don't have kitchen cabinets that look that great if I had taken the time to make that cabinet.

Superb job Todd!

Ray

Re: Tool Cabinet Project

#15

Re: Tool Cabinet Project

mamc

Lovely ! I really want one....Unfortunately for me, my tools seem to want to scatter themselves all over the 2 workbenches, so the cabinet would be empty in about three days....lol. Seriously very nicely done!

Re: Tool Cabinet Project

#16

Re: Tool Cabinet - That's ridiculous!

Todd Nebel

Funny you say that. My wife reacted the same way once she started to see it come together. Then all she could say is how she doesn't understand why I was spending so much time on making it look like furniture. Then she added a couple more of her wish list items to the HDL.

Re: Tool Cabinet Project

#17

Re: Tool Cabinet Project

Todd Nebel

I was that way until I built this cabinet. Now having a place for everything makes me want to put everything in its place. I actually feel more productive not looking for my tools on 3 different surfaces.