Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

used bench

Posts

used bench

#1

used bench

Ray

I am a real rookie, but I think the following information is accurate

I have a chance to purchase a used La Chappelle bench which is approximately 70" long. It has a tail vise and a face vice

There appears to be very little about these benches on the internet. I would like your opinion as to what a general price range would be for the used bench I found and any tips as to what pitfalls I should be looking for.

Thanks

Re: used bench

#2

JL

Re: used bench

JL

I've not seen those benches - so I can't really say. However, a new bench by a different manufacturer that is a similar size might run $1000.

So - the question is - how much to offer. Your call. Benches don't really lose much value, IMO.

I will offer a different alternative. You say you are just getting into woodworking. Build your own. By the time you are finished, you will have learned a lot about mortising and making tenons, a lot about gluing and clamping, a lot about jointing and planing.

Re: used bench

#3

Re: used bench

Bill Houghton, Sebastopol, CA

Some commercial benches are substantial workholding devices - google "Ulmia bench" for one such example.

Other commercial benches are lightweight critters that are just a step above a Workmate* - google "Sjoberg bench" for some examples at that end (note: some Sjoberg benches are heavier than others).

If you can pick up one end, it's worth a LOT less than if you can't.

*Not to disrespect Workmates, which are great tools for what they do well; but they're not workbenches.

Re: used bench

#4

Re: used bench

Ray

Thanks for the reply. I have looked at some of the more affordable new benches and I felt that they looked weak. I leaned on one and it started to yield. The salesperson took me to their classroom and showed me that they used them for tool instruction. They each had several large bags of sand draped over the base.

The used one that I am looking at weighs somewhere around 250lbs. It resembles the $1,000+ ones sold through Garrett Wade. The vises have been removed, so I think the biggest challenge for me will be attempting to reinstall them correctly.

Thanks again