General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
problem with pressure balanced faucet
by Bill Tindall, E.TN. 6/29/16, 10:44 PM
15 Replies · 42 ViewsLast post 7/1/16, 11:20 AM by Bill Tindall, E.TN. -
The Butler's Desk - Drawer Building
by Brian Holcombe 6/30/16, 11:33 AM
0 Replies · 33 ViewsLast post 6/30/16, 11:33 AM by Brian Holcombe -
by Bill Tindall, E.TN. 6/27/16, 1:38 AM
6 Replies · 63 ViewsLast post 6/30/16, 12:35 AM by Larry Clinton At Frankfort, (Central) Indiana -
The Drill Press....Paul Harvey Time
by Thomas Skaggs 6/28/16, 6:58 PM
5 Replies · 31 ViewsLast post 6/29/16, 10:47 PM by Hank Knight -
Some more bandsaw questions????
by Barry Irby 6/27/16, 12:06 PM
9 Replies · 40 ViewsLast post 6/29/16, 5:44 PM by Johanna -
Hand Tool Chat tonight 9:30PM EDT
by Bob Entwisle in NJ 6/28/16, 10:51 PM
0 Replies · 33 ViewsLast post 6/28/16, 10:51 PM by Bob Entwisle -
by eliot feldman 6/28/16, 2:38 PM
5 Replies · 84 ViewsLast post 6/28/16, 8:42 PM by John McGaw -
by eliot feldman 6/26/16, 10:59 PM
11 Replies · 48 ViewsLast post 6/28/16, 3:00 PM by Barry Irby -
Looking for a South Jersey Shop
by Bart Goldberg 6/28/16, 1:19 PM
2 Replies · 38 ViewsLast post 6/28/16, 2:13 PM by Bart Goldberg -
WC Weekend Accomplishments....
by Dennis E Peacock 6/27/16, 11:52 AM
3 Replies · 28 ViewsLast post 6/28/16, 1:33 PM by Hank Knight -
by Jessica 6/27/16, 7:37 PM
2 Replies · 24 ViewsLast post 6/28/16, 1:41 AM by Tom Dunlap -
by Ray 6/27/16, 5:20 PM
0 Replies · 34 ViewsLast post 6/27/16, 5:20 PM by Ray -
by Gordon 6/26/16, 7:57 PM
8 Replies · 35 ViewsLast post 6/27/16, 4:36 PM by Gordon -
zero clearance insert splitter
by eliot feldman 6/25/16, 2:09 PM
11 Replies · 54 ViewsLast post 6/27/16, 3:12 PM by Gary Smyth -
by Joe 6/24/16, 1:32 PM
7 Replies · 34 ViewsLast post 6/27/16, 12:48 PM by Joe -
by Dan Bundy 6/25/16, 11:28 PM
9 Replies · 52 ViewsLast post 6/27/16, 10:12 AM by Dan Bundy -
Vacuum Veneering with Polyurethane 2
by don stephan 6/17/16, 6:16 PM
43 Replies · 224 ViewsLast post 6/27/16, 12:21 AM by eliot feldman -
Someone please talk me out of this... *LINK* 2
by Thomas Skaggs 6/23/16, 1:45 PM
35 Replies · 117 ViewsLast post 6/25/16, 2:44 PM by Hank Knight -
Might Just Have To "Take Steps"
by Mark Mandell 6/20/16, 6:56 PM
15 Replies · 68 ViewsLast post 6/25/16, 7:48 AM by TomD -
by roger lance 6/14/16, 7:20 PM
15 Replies · 78 ViewsLast post 6/24/16, 10:28 PM by Jerry Nicholson -
by Christopher Fitch 6/18/16, 2:44 AM
3 Replies · 25 ViewsLast post 6/24/16, 3:44 PM by Johanna -
Question on locating drawer pulls
by Bill Tindall, E.TN. 6/22/16, 3:20 PM
9 Replies · 40 ViewsLast post 6/23/16, 10:44 PM by Ellis Walentine -
The Butler's Desk - Closing the Case
by Brian Holcombe 6/23/16, 4:10 PM
0 Replies · 35 ViewsLast post 6/23/16, 4:10 PM by Brian Holcombe -
Freud LU73M012 circular blade 2
by ChuckInND 6/16/16, 9:49 PM
31 Replies · 101 ViewsLast post 6/23/16, 12:55 PM by ChuckInND -
table saw for a jointer -third attempt 2
by eliot feldman 6/21/16, 8:45 AM
27 Replies · 198 ViewsLast post 6/23/16, 8:51 AM by eliot feldman -
laying wood floor in unconditioned space
by ronster 6/20/16, 4:59 PM
3 Replies · 58 ViewsLast post 6/23/16, 4:58 AM by ronster -
by Bill Tindall, E.TN. 6/20/16, 8:44 PM
13 Replies · 98 ViewsLast post 6/23/16, 12:14 AM by don stephan -
able saw for a jointer --second attempt
by eliot feldman 6/20/16, 12:37 PM
18 Replies · 72 ViewsLast post 6/22/16, 1:11 AM by eliot feldman -
Hand Tool Chat tonight 9:30PM EDT
by Bob Entwisle in NJ 6/22/16, 12:05 AM
0 Replies · 53 ViewsLast post 6/22/16, 12:05 AM by Bob Entwisle -
by Alan Young 6/20/16, 7:51 PM
8 Replies · 41 ViewsLast post 6/21/16, 4:39 PM by Jim DeLaney, Austintown, Ohio



