Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Question on locating drawer pulls

Posts

Question on locating drawer pulls

#1

Question on locating drawer pulls

Bill Tindall, E.Tn.

My uncreative mind hopes for a formula that says locate 58.3% of the width up from the bottom.....but such a formula is not to be I presume.

When I diddle with location I usually wind up with a location slightly high from center that looks best to me. But maybe I have astigmatism.

Is there any sage advice to be found on pull location?


Re: Question on locating drawer pulls

#2

Ellis Walentine

Re: Question on locating drawer pulls

Ellis Walentine

I don't believe there is so much a formula as some basic design considerations that you need to figure out for yourself on a case by case basis. (Pun intended.)

One consideration is whether one or two pulls are best for a given drawer. I tend to favor a single pull unless the drawer is over, say, two feet wide-- again no specific recommendation. The main consideration, though, is aesthetic. Think of the face of the cabinet as a whole, consider the style/color/complexity of the pulls you favor, and draw yourself some thumbnail sketches of possible placements and configurations v. the overall appearance of the face. I tend to keep pulls (and knobs) above center, but the exact distance is pretty much up to your perssonal preference. Here's where binomial comparisons come in handy. Try sticking them on with double face tape in a couple of configurations you've settled on in your sketches and see what works best. Usually you can make a decision pretty easily by this method.

Or just ask your wife... :)

Ellis

Re: Question on locating drawer pulls

#3

I agree with E,

Keith Newton

But whenever using a graduated progression, the top drawer will be the shortest in height. I will center the pull in the narrowest, then use that distance from the top of all the other drawers. One thing this does, is raises the pulls on the bottom / usually deepest drawers, by a few inches, so you don't have to bend quite as far down to reach the pull forever after.

Re: Question on locating drawer pulls

#4

Golden Ratio

Hoa in Alameda

"Or just ask your wife..."

That was exactly what I did.

Interestingly, every single time, she picked the location where the distance from the pull to the bottom of the drawer front was 1.6 times of the distance from the pull to the top.

The golden ratio at work....

Re: Question on locating drawer pulls

#5

Foreshortened view

GolfSteve in Calgary

Perspective & foreshortened views:

If you are looking down on the drawer, locating the pull slightly above centre looks correct.

If you are looking up at the drawer, locating the pull slightly below centre looks correct.

At all times, whatever looks best to you eye is best (*)...until you change your mind three months later.

(*) My wife has a crappy eye, so despite always asking what her opinion is, I usually ignore her opinion and do what looks best to my eye.

Re: Question on locating drawer pulls

#6

a corollary

GolfSteve in Calgary

A corollary: regardless of what you do, no one else who is not a woodworker will care or even notice.

Re: Question on locating drawer pulls

#7

Re: another corollary

Mark Mandell - Gone Round In New Jersey

"Let him decide where to put the damn handles. That way, if they're wrong nobody blames you."

[The Wise MotherInLaw's Handbook]

;)

Re: Question on locating drawer pulls

#8

Re: Question on locating drawer pulls

Jesse Cloud

I always ask my wife or whoever its for.

Which brings to mind something I saw on Facebook this morning:

"When a woman tells a man he is right, that's what they call sarcasm." :D :D

Re: Question on locating drawer pulls

#9

Decision made

Bill Tindall, E.Tn.

Single pull, a bit top of center.

This piece is for a 9 year old. It needed robust easy to manage pulls.

Re: Question on locating drawer pulls

#10

Ellis Walentine

... and with all that drawer fitting...

Ellis Walentine

...you shouldn't have any binding with one pull.

Sounds like a fine choice.

Ellis