Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Someone please talk me out of this... *LINK*

Posts

Someone please talk me out of this... *LINK*

#1

Someone please talk me out of this... *LINK*

Thomas Skaggs, Foothills of Mount Level

At some point I'd like to get a better standing drill press. I have a cheap Jet 17". It is a manually adjusted speed model. The quill travel is only 4" and it has runout issues. I figured some day I'd upgrade to a Powermatic variable speed, or similar.

Anyway, I saw this ad on Craigslist. I am attaching the link. If anyone id familiar with old Rockwell/Delta machines, please take a look.

First...yes, I think the price is steep. But what I am interested to know, is whether a machine like this is a good comparable buy to the new machines, functionally? Or would I end up regretting not getting a new machine? Thanks for any input or advice!!


Drill Press

Re: Someone please talk me out of this... *LINK*

#2

Re: Someone please talk me out of this...

Marty

Ha, if I were closer,I would talk you out of it,and go buy it myself!

Re: Someone please talk me out of this... *LINK*

#3

Re: Someone please talk me out of this... *LINK*

Tom Dunlap

All you need is one of these


Bring this

Re: Someone please talk me out of this... *LINK*

#4

How's This *LINK*

Mark Mandell - Gone Round In New Jersey

For $300 more you get 3 more inches of capacity, more power, lights, updated VS, and full warranty, and free shipping.

[don't care about the foot feed]

done


P-Matic

Re: Someone please talk me out of this... *LINK*

#5

Re: Someone please talk me out of this...

Hank Knight

Tom, I would feel much more comfortable talking you into buying that press than out of it. I firmly believe that you can't but a modern drill press that compares favorably with any of the "old arn" ones. I don't know when that press was built, but it looks to be of late '50s - early 60s vintage. Delta Rockwell was still buildng good machines in those days. The one you are considering has two features that are hard to find: the speed changer and the foot advance. Those combined with the apparent wonderful shape that press is in easily justify the price. I don't think you can come close to it in a modern machine for that price. I have an early 1950s vintage Walker Turner (pre Rockwell) press. I wouldn't trade it for any new comparable machine on the market.

My $.02.

Hank

Re: Someone please talk me out of this... *LINK*

#6

Re: Someone please talk me out of this...

Robin Corell in Atascadero, CA

That's a good looking drill press, no doubt about it. It looks like its been restored but I would want to know if it has new bearings. The foot feed is nice if you want to use it with a morticeing attachment or for doing repetitive things like shelf pin holes. On the down side, and it is a big one, the table looks to be manual height adjust. My first press was an old Wilton with a reeves pulley and I got rid of it because it didn't have a crank to raise and lower the table.

Where I teach part time we have that same drill press and it is a great drill. Students tend to throw various pieces of scrap, multiple pieces or ply, or chunks of 4x4, on the table rather than raising the table which always seems to be sitting on the height stop collar about 4" bellow the max quill feed. Most of the time this works just fine but it also introduces a bit of wiggle or chances of out of square.

I'm really happy with my Delta Unidrill but if I had a larger shop I would still be looking for a Walker Turner ram head radial, or my dream overkill drill press, a Bridgeport mill (yes, I'm serious about the mill)

Re: Someone please talk me out of this... *LINK*

#7

Re: Someone please talk me out of this...

Ray Newman

Agree!

Re: Someone please talk me out of this... *LINK*

#8

Re: Someone please talk me out of this...

Ray Newman

Only if you got there ahead of me!.......

Re: Someone please talk me out of this... *LINK*

#9

Re: Someone please talk me out of this...

Barry Irby

I have a Delta Rockwell DP I bought in 1971. I have the mortising attachment for it and have used it for all those years, sometimes hard. Mine is not as nice as the one in the picture. Lacks the variable speed and the foot pedal and the tilt table. I still like it and if I got another, I would not get rid of it. Mine is a floor model and that's important.

I would buy it in a minute. They are top heavy, you might want to bolt it to the floor. If for not other reason to keep some fellow Wood Centralian from borrowing it.

Re: Someone please talk me out of this... *LINK*

#10

No, I won't!

John in NM

Like most of the others, I would go buy that one over a new one any day.

I don't need that speed control myself, but they are nice to have if you need to change speeds often.

From the look of the table, it has not been abused, so I wouldn't worry overly about the bearings. My drill press is that age, been used half to death, and the bearings are fine. Maybe they were replaced at some point but from the look of the table on mine they would have been pressed with a sledge and failed again already :D

Re: Someone please talk me out of this... *LINK*

#11

My Incorrigible Bretheren.....

Thomas Skaggs, Foothills of Mount Level

...of course I have to ask myself why I would come to WC to talked out of a power tool? Do I have a subliminal need to be talked IN to a power tool? There is but one angel on my right shoulder. The rest of you are on my left shoulder! :D

Why is it that I find things like this right on the heels of a(albeit productive and civil) discussion with my "boss" (of 28 years) about money? There is a certain "art" to all of this. First you make it known to the "boss" that your drill press sucks. Then you bring it up every now and again for months, at least. Then when something turns up, it's not just out of the blue. Dang me for not laying the ground work! So now I must ask myself how brave am I?

So had there been a bunch of "that is a terrible drill press" comments, I could have put it to bed with the "boss" none the wiser. Instead, it appears that my Wood Central brothers are pushing me towards the firing squad. Curses!!!

Re: Someone please talk me out of this... *LINK*

#12

Dibs

Mark Mandell - Gone Round In New Jersey

on the blindfold and cigarette concession!

;)

Re: Someone please talk me out of this... *LINK*

#13

For future reference....

John in NM

One sneaky way of getting the boss on board is to need help with some terrible and tedious task (like sanding an ipe deck for refinishing), and then after doing it once the alternative method presented (a Byrd head for planer) seems positively wonderful.

And don't mention to the boss that there are online forums where we discuss these things, or it'll never work again! :D

No, it doesn't help with the drill press, but maybe you got a chuckle :D

Re: Someone please talk me out of this... *LINK*

#14

Re: Dibs

Barry Irby

Dibs?? Dibs??? I want dibs on the drill press after the boss takes you out.

Re: Someone please talk me out of this... *LINK*

#15

Alan Young

Tell the Boss that

Alan Young

your partime-Woodworking pal has one of these


so as a Full Time Woodworker your purchase is more than just.

Re: Someone please talk me out of this... *LINK*

#16

Re: For future reference....

Clifton C

Get the drill press, go find an ugly lampshade, slap it on top and say, "Look honey, a new lamp for the living room..." After she admonishes you for your lack of interior decorating finesse, meekly say, "well, maybe it will look good in the shop"

Problem solved...

Re: Someone please talk me out of this... *LINK*

#17

Re: Tell the Boss that

Thomas Skaggs, Foothills of Mount Level

I seem to recall you trying to talk me into a mill some years ago. You are truly evil sir!! ;-)

Re: Someone please talk me out of this... *LINK*

#18

Re: Out of curiosity, where is the Powermatic made


Re: Someone please talk me out of this... *LINK*

#19

Re: Dibs

Thomas Skaggs, Foothills of Mount Level

If you see me in the obituaries, you'll know what REALLY happened!

T.

Re: Someone please talk me out of this... *LINK*

#20

Re: Someone please talk me out of this...

Larry Copas

I have that drill press minus the foot feed. I love it and will never regret buying it. With the reeves drive they are a little noisy. Also the table is twist and scoot deal. Everything else is ideal on it. The price seems high to me, at least in my market. I gave something less than $300 for mind and two more at the same auction sold similar.

Re: Someone please talk me out of this... *LINK*

#21

The foot feed...

Brian Roberts

is fantastic......you will use it !

Leaves both hands free to hold stock.....very useful....and very hard to find!

Re: Someone please talk me out of this... *LINK*

#22

Lack of table height adjusment.

Virgil Johnson

This would be a deal killer for me. I have a 15" Craftsman from the 70's which is a solid machine but moving the table up and down without a rack and pinion assist is a PITA. The "vintage" foot feed does not excite me either. Drilling a hole while standing on one foot....Maybe a bonus for mortising.

Re: Someone please talk me out of this... *LINK*

#23

Alan Young

I think there is--It's just not a

Alan Young

on a rack and pinion crank. The knob and handle probably loosens the collar so you can turn and raise/lower- Not as fast as dedicated vertical crank but not a deal breaker for me...


Re: Someone please talk me out of this... *LINK*

#24

Poor choice of wording in my first post title.

Virgil Johnson

The table can be moved up and down. It does not have a rack and pinion assist that I would want if I were to pay 1100 bucks for a machine.

Re: Someone please talk me out of this... *LINK*

#25

Alan Young

and I figured that out after my post :^)

Alan Young

Yup- Understand that lack of R&P could get tedious.. Aside for the overall advantages of the ability to drill holes in large pieces- ie- full length drill press...If Tommy is willing to spend $11K on a machine he should check around for used Mill Drills- The X-Y table is a real deal maker for me....