Re: type of hard board *LINK*
Clifton C
I've used MDF for paint grade built in units. Construction was mostly screwed and glued, actually tacked with a finish nailer, pilot hole drilled, then screwed. The heavy stuff is heavy, go figure. The ultra lite works great the higher up in the building you have to carry it. Dentability is fairly durable on the face and a bit less on the edge as would be expected. Edges where taped with paint grade thermal edge banding or face framed. We used Bondo where we needed to fill a seam or screw hole. It gets a bad rap, most people hate it but it has its place. Good dust collection is a must...
cc
MDF