General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
WC Weekend Accomplishments....
by Dennis E Peacock 8/15/16, 4:22 AM
4 Replies · 38 ViewsLast post 8/17/16, 5:56 PM by jessecloud -
by Doug Ridley 8/5/16, 10:48 AM
12 Replies · 36 ViewsLast post 8/17/16, 3:26 PM by ebd -
by Thomas E Norton 8/13/16, 8:05 PM
19 Replies · 44 ViewsLast post 8/17/16, 1:22 PM by Larry Clinton At Frankfort, (Central) Indiana -
by Tom 8/16/16, 1:00 AM
7 Replies · 28 ViewsLast post 8/17/16, 12:51 PM by ian neuhaus -
by Barry Irby 8/14/16, 3:15 PM
3 Replies · 33 ViewsLast post 8/17/16, 11:37 AM by Barry Irby -
RIDGID 14 in. Band Saw Model No. BS14002
by Doug Wolf 8/15/16, 4:20 PM
8 Replies · 80 ViewsLast post 8/17/16, 4:13 AM by AZ -
by Charles Yawn 8/14/16, 10:57 PM
3 Replies · 30 ViewsLast post 8/16/16, 10:41 PM by Jay Lombardo -
Chest of drawers stained and one coat
by Bill Tindall, E.TN. 8/14/16, 3:14 PM
10 Replies · 28 ViewsLast post 8/16/16, 2:01 PM by Mark Mandell -
by Ken Krawford 8/16/16, 12:14 AM
2 Replies · 67 ViewsLast post 8/16/16, 4:01 AM by Martin S. -
by Stuart Johnson 8/15/16, 1:27 AM
5 Replies · 34 ViewsLast post 8/16/16, 1:18 AM by Keith Newton -
What is an End Mill? (JesseCloud?)
by Barry Irby 8/13/16, 10:03 PM
19 Replies · 78 ViewsLast post 8/16/16, 1:11 AM by William Duffield -
by Mike Van Pelt 8/9/16, 7:41 PM
15 Replies · 44 ViewsLast post 8/14/16, 8:16 PM by William Duffield -
by Bill Tindall, E.TN. 8/11/16, 10:30 PM
20 Replies · 75 ViewsLast post 8/13/16, 11:05 PM by Brian Holcombe -
by Mike Van Pelt 8/9/16, 7:53 PM
2 Replies · 25 ViewsLast post 8/13/16, 8:03 PM by mike van pelt -
by Tom 8/11/16, 11:10 PM
8 Replies · 34 ViewsLast post 8/13/16, 1:15 PM by Dustmaker Mike -
by Jerry Gibbs 7/30/16, 3:33 PM
20 Replies · 52 ViewsLast post 8/13/16, 12:49 PM by don stephan -
by Jill 8/12/16, 10:10 PM
3 Replies · 35 ViewsLast post 8/13/16, 2:34 AM by Yonak -
What are these sticks I bought?
by Barry Irby 8/11/16, 6:14 PM
14 Replies · 70 ViewsLast post 8/12/16, 6:19 PM by Rum -
Cherry or mahogany for telescope case?
by Matt 8/7/16, 5:22 PM
20 Replies · 37 ViewsLast post 8/12/16, 10:31 AM by Mark Mandell -
by Brian Holcombe 8/11/16, 5:59 PM
0 Replies · 36 ViewsLast post 8/11/16, 5:59 PM by Brian Holcombe -
by Mark Mandell 8/5/16, 1:57 PM
26 Replies · 67 ViewsLast post 8/11/16, 2:39 PM by Dale Lenz -
by Paul Leuba 8/8/16, 9:25 PM
12 Replies · 49 ViewsLast post 8/11/16, 9:16 AM by Derek Cohen (in Perth, Australia) -
by jerry roberts 8/7/16, 8:38 PM
19 Replies · 53 ViewsLast post 8/10/16, 4:37 AM by Hank Knight -
by William Duffield 8/9/16, 12:21 AM
6 Replies · 40 ViewsLast post 8/10/16, 12:12 AM by John K Jordan -
by Stuart Johnson 8/7/16, 1:19 PM
9 Replies · 37 ViewsLast post 8/9/16, 12:51 PM by Bill Tindall, E.TN. -
by tom 8/8/16, 11:00 AM
10 Replies · 51 ViewsLast post 8/8/16, 10:00 PM by John K Jordan -
by Rich Pearson in Mill Creek, WA 8/7/16, 11:57 PM
4 Replies · 40 ViewsLast post 8/8/16, 4:34 PM by Gary Smyth -
Saber saw blades for clean cutting
by c a gernentz 8/7/16, 4:12 PM
7 Replies · 49 ViewsLast post 8/8/16, 9:54 AM by John K Jordan -
by Steve jenkins 8/6/16, 11:09 PM
11 Replies · 40 ViewsLast post 8/7/16, 5:16 PM by Steve jenkins -
Unanticipated problems building in a new style
by Bill Tindall, E.TN. 8/5/16, 12:17 PM
3 Replies · 49 ViewsLast post 8/6/16, 4:57 PM by Brian Holcombe



