Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

need your input please

Posts

need your input please

#1

need your input please

Mike Van Pelt

Hey fellow woodworkers;

We are planning our Fall Woodworking Show and we are working on making this our best show ever. We are working with our vendors to have show specials and working with our instructors to have lots of free demos and education. I am asking you for your input on what you like to see and what products should we have at our show. We are planning on having free food and drawings. Please let me know....I want this to be our best show.

thanks

Mike

CU Woodshop

Re: need your input please

#2

Please see my response to "what do you like"


Re: need your input please

#3

What is this post all about

Bill Tindall, E.Tn.

It looks like advertising for something I never heard of.

Re: need your input please

#4

It's a Rockler associate store in Champaign IL

Dick Coers

They also have a membership shop.

Re: need your input please

#5

The Psychic Connection

Mark Mandell - Gone Round In New Jersey

is the only way we could have known that from the posts.

Props, Dick! Care to share your picks on tonight's Powerball? :D :D

Re: need your input please

#6

I won my lottery in 1971

Dick Coers

I had an education deferment for the 1970 draft. In 71, I had to decide if I would renew the deferment or take my chance with the lottery. I decided to take the chance. My birthdate of Sep 30, was drawn with the number 299. Add that to the slow down in Viet Nam, and I didn't have to go to war. I've always felt that was better than winning money.

As far as CU Woodshop, I've been there several times, and Mike can sometimes make a posting on here as fall gets closer. He will also post when the Amish Woodworking Show happens in Arthur, IL.

Re: need your input please

#7

Sorry I will try again

Mike Van Pelt

Please forgive me if I steppped over the line. I am not trying to advertising, I am truly interested in honest feed back. Last years show was not very good and I am working to make sure that never happens again.

I know that WoodCentral members have attend lots of shows over the years and I was trying to build upon those experiences.

I am working to make the 2016 show the best show we can do. So please tell me what you like to see at a dealers open house and demo days. .

thanks

Mike

Re: need your input please

#8

Dick said it all

Bill Tindall, E.Tn.

His post seems to have vanished which is too bad because it summarizes what a good show should be all about.

1. Shows are where I get problems solved with companies. They should be there to meet and greet and be helpful to customers. Nothing is more annoying than indifferent vendor representatives. It should be made clear that if any are visible on their cell phones they will be reported to their employer and not invited again.

2. Free stuff. There should be free stuff.

3. Show specials. I am not attending IWF this year because show specials and free stuff have largely vanished from this show. It still is a great place to get a company's attention and a problem solved.

Re: need your input please

#9

Mike

Mark Mandell - Gone Round In New Jersey

So your putting on a show. Fine, but your posts don't say where, when, etc. Gotta remember that WC is "nationwide" even though it feels like a local club. Some people will travel long distance to go to a major gathering, but most don't have the time or inclination for such travel. Giving location and dates will foster responses form your likely attendees. If you expect readers to look at your email address and figure out what and where "cuwoodshop" is you're likely to be disappointed in the responses.

Re: need your input please

#10

Re: Sorry I will try again

Grant in Iowa

Mike,

I can offer the following points of what I like to see, some of which are from the perspective of a hobbyist woodworker, and some are from the perspective of a Facility Manager:

1. I like when factory reps are present and showing why they believe their tools are superior. It is extra nice when they have "safer" tools available to try out. Examples are cordless tools set up to operate, drive fasteners, drill holes, sand a piece of wood, etc.

2. I like it when factory reps pull some strings and offer deals on items, or throw in an extra battery, or bit or whatever. Honestly, the shirts and hats don't do much for me, personal preference maybe, because I see others seem to like to wear tool company advertising.

3. Our local tool store often invites the local woodworking guild, turning guild, and carving guild to put on demonstrations. These are not paid gigs. Instead, these clubs are allowed to talk about their clubs and offer memberships to customers in exchange for having completed works present to inspect by customers. I think a few gift cards might be offered to the clubs that they can raffle internally as a fund raiser. I think a lot of customers get quite a bit from this, and I have found that when acting as a club member, I get lots of questions from people wanting to buy a given tool, but they'd like our opinion of which model to buy. This type of exchange lends a "helping" feeling to the event, rather than an "all sales pitch" atmosphere. Such interaction ultimately brings the store up a notch or two on a customers list. Perhaps most importantly, this can increase the number of craftspersons in your area, which can help drive sales long term.

4. Hospitality is the name of the game I think. Treat the event like an open house, not like a sale. At least that's what I like.

5. As the store operator, you might find some type of widely appealing deal on something like Mahogany, or another popular wood. Use that to bring folks in.

FWIW,

Grant in Iowa

Re: need your input please

#11

Re: Mike

Mike Van Pelt

Thanks Mike,

I was just gathering info on how we can improve our show and did not want to cross the line about blatantly advertising. Our store, school, and dream shop is located in Champaign IL under CU Woodshop Supply, Inc.

thanks so much

Mike

Re: need your input please

#12

thank-you Grant

Mike Van Pelt

Grant:

Thank-you so very much for your great suggestions. This is wonderful advise.

thanks

Mike

CU Woodshop Supply

Champaign IL

Re: need your input please

#13

Re: Dick said it all

TomD

If I can't get the info I want from a manufacturer without going to the show, I am not interested in whatever it is they are selling. Not to say it isn't important for those who do go.

Re: need your input please

#14

Re: Sorry I will try again

Cam

I have gone to a few shows and here are some of my observations. Keep in mind that I am NOT a US resident so things up here in Canada might be different.

What I like/dislike:

1. Manufacturer's sales people who are there to explain their company's product and who know their competition's product as well. Very frustrating to ask how a feature on theirs compares to a similar feature on their competitors and they don't know what you are talking about. Also, they shouldn't act like hucksters with "limited time offers" to try and convince you to buy "right now" before you can look at any other products at the event. If they have a good product and not a piece of crap, they shouldn't have to bow down to this kind of "marketing".

2. Yes, special pricing is good but even if they matched their own retailers, it would be nice. Most of them price their products HIGHER than their retailers so that they don't get them (the retailers) upset. If they don't want to match prices, then have one of their retailers there to make the sale!

3. Non related booths like "new and improved household mops, knives, vegetable cutters etc." and hot tubs at a woodworking show just so all the floor space is filled. A couple of spots for food vendors is okay but it shouldn't take up 25% of the space to do so! And keep the food away from the middle of the event.

4. Sales people who aren't either talking to one of their friends about how much beer they drank last night or on their cell phones. I went to one show where I wanted to talk to a "green" rep (the ONLY reason I went there) but he stood and talked to someone with a big Milwaukee shirt on for 45 minutes while I was standing there waiting for him to finish up and it wasn't that he didn't see me. I finally left and haven't inquired about "green" products since!

5. Demonstrations I think are important, especially if you are selling something new or to a crowd of people who are new to the product you are selling. Actions over words work for me.

6. A place to rest. I am getting up there in age and walking on concrete floors and standing all the time wears me out. If I could sit down for 10 minutes every once in a while, I could get to see the whole show before I go home and the presenters just might get more of my money.

Cam

Re: need your input please

#15

thanks Cam

mike van pelt

Dear Cam:

Great! Thank you for your great suggestions and tips. We will incorporate your ideas into our Open House & Fall Festival in November. Thank-you for taking the time.

thanks

Mike

Re: need your input please

#16

Re: Sorry I will try again

William Duffield

In addition to Grant's suggestions for free skills demos and displays of fine furniture work from non-marketing organizations, you should contact your local Society of American Period Furniture Makers (SAPFM). If you need more contact info or an introduction, e-mail me, and I'll get back to you next weekend when I get home.