General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
C Becksvoort and Shaker furniture
by Ray Newman 8/24/16, 11:38 PM
1 Reply · 25 ViewsLast post 8/25/16, 12:33 PM by Joe -
by Thomas Skaggs 8/24/16, 6:16 PM
4 Replies · 38 ViewsLast post 8/25/16, 3:21 AM by William Duffield -
by Bill Tindall, E.TN. 8/24/16, 9:45 PM
0 Replies · 40 ViewsLast post 8/24/16, 9:45 PM by Bill Tindall, E.TN. -
by charlie belden 8/19/16, 8:49 PM
19 Replies · 173 ViewsLast post 8/24/16, 4:16 PM by Hal -
Time for a new shop vac...recommendations?
by Grant Smith 8/19/16, 11:41 AM
8 Replies · 71 ViewsLast post 8/24/16, 3:50 PM by William Duffield -
WC Weekend Accomplishments....
by Dennis E Peacock 8/22/16, 4:25 AM
1 Reply · 25 ViewsLast post 8/24/16, 3:42 PM by John McGaw -
by Doug Reynolds 8/23/16, 11:13 PM
3 Replies · 133 ViewsLast post 8/24/16, 4:58 AM by John K Jordan -
Need to cut a weird angle on table saw
by Ron Peterson 8/21/16, 8:01 PM
8 Replies · 128 ViewsLast post 8/23/16, 11:53 PM by Derek Cohen (in Perth, Australia) -
by Doug Reynolds 8/22/16, 2:25 AM
15 Replies · 54 ViewsLast post 8/23/16, 3:57 PM by Gary Smyth -
Manual Ligneous Manipulation Apparatus Discourse
by William Duffield 8/23/16, 2:32 PM
0 Replies · 40 ViewsLast post 8/23/16, 2:32 PM by William Duffield -
by Johanna Johanson 8/19/16, 7:06 PM
8 Replies · 80 ViewsLast post 8/23/16, 1:17 PM by Tony - Memphis -
Do you need an extra pair of hands?
by Ann Oglanian 8/22/16, 4:28 PM
1 Reply · 26 ViewsLast post 8/22/16, 10:15 PM by Grant in Iowa -
What Reeally is an "In The Wood Finish"
by don stephan 8/21/16, 4:29 PM
6 Replies · 72 ViewsLast post 8/22/16, 3:11 PM by Bill Tindall, E.TN. -
by Barry Irby 8/21/16, 10:01 PM
8 Replies · 52 ViewsLast post 8/22/16, 1:30 PM by Larry Clinton At Frankfort, (Central) Indiana -
Please welcome our new advertiser -- M&M Tools *LINK*
by Ellis Walentine 8/19/16, 3:30 PM
6 Replies · 38 ViewsLast post 8/22/16, 12:14 AM by Frank orfanello -
OT-REmoving stain from Aluminum?
by Tom 8/21/16, 12:03 AM
4 Replies · 31 ViewsLast post 8/21/16, 2:03 PM by Bill Howatt -
by Stuart Johnson 8/20/16, 1:17 PM
6 Replies · 45 ViewsLast post 8/21/16, 12:57 AM by Stuart Johnson -
Rockwell 11-280 Radial Drill Press project
by CharlieL 8/19/16, 3:08 PM
2 Replies · 33 ViewsLast post 8/20/16, 5:48 PM by CharlieL -
by AZ 8/18/16, 2:33 AM
14 Replies · 104 ViewsLast post 8/20/16, 5:25 PM by ken combs -
A problem with finishing the recent walnut pieces
by Bill Tindall, E.TN. 8/18/16, 6:06 PM
9 Replies · 38 ViewsLast post 8/20/16, 11:25 AM by Barry Irby -
Fastening a top with traditional pocket screws
by Bill Tindall, E.TN. 8/19/16, 12:03 PM
7 Replies · 31 ViewsLast post 8/20/16, 12:32 AM by don stephan -
by Alan Young 8/19/16, 8:25 PM
1 Reply · 28 ViewsLast post 8/19/16, 9:34 PM by Thomas Skaggs -
by Mark Mandell 8/19/16, 6:49 PM
0 Replies · 38 ViewsLast post 8/19/16, 6:49 PM by Mark Mandell -
by AZ 8/18/16, 12:47 PM
12 Replies · 40 ViewsLast post 8/19/16, 1:31 PM by Keith Newton -
Who Will Be The First... *LINK*
by John McGaw 8/17/16, 11:22 AM
6 Replies · 26 ViewsLast post 8/18/16, 10:19 PM by John McGaw -
WC Weekend Accomplishments....
by Dennis E Peacock 8/8/16, 12:43 PM
18 Replies · 45 ViewsLast post 8/18/16, 10:14 PM by John in NM -
by Barry Irby 8/18/16, 11:51 AM
5 Replies · 34 ViewsLast post 8/18/16, 7:22 PM by Barry Irby -
Finishing Schedule for recent walnut pieces
by Bill Tindall, E.TN. 8/18/16, 6:00 PM
0 Replies · 35 ViewsLast post 8/18/16, 6:00 PM by Bill Tindall, E.TN. -
by Bill Tindall, E.TN. 8/17/16, 10:17 PM
0 Replies · 54 ViewsLast post 8/17/16, 10:17 PM by Bill Tindall, E.TN. -
by Doug Reynolds 8/17/16, 3:54 PM
3 Replies · 31 ViewsLast post 8/17/16, 6:08 PM by Tony - Memphis



