Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

High School Math Question

Posts

High School Math Question

#1

High School Math Question

Doug Reynolds

Having a senior moment here. They seem to be coming more often. I have a variety of round-over router bits that are unmarked as to size. Seems router bit manufacturers could learn something from the drill bit makers. Now I need a 1/4" radius round-over on some toys I am making. What diameter drill bit can I use to determine which router bit is the 1/4" round over? I know I learned this in high school but, cannot remember. Please help as I suffer from old timers disease. I hurt myself just waking up. Every time I wake up in the morning, something else hurts.

Re: High School Math Question

#2

Re: High School Math Question

Jerry Nicholson

1/4 radius = 1/2 inch diameter

Jerry

Re: High School Math Question

#3

Re: High School Math Question

Barry Irby

Jerry is right. Radius is half the diameter. OTOH. this may be a case of if it looks right it is right. Use whatever bit you have on a scrap and see if you like it.

Re: High School Math Question

#4

Drills

Mark Mandell - Gone Round In New Jersey

Go to your bit box, take out a 1/4" bit, match it to the profiles on your round-overs. Done? A 1/4" round-over has a 1/4" radius. A 1/8" round-over has a . . .

;)

Re: High School Math Question

#5

Opportunity

John K Jordan

A drill bit?! That's embarrassing for a card-carrying tool junkie. Think about your reputation. This is a perfect opportunity to order a Starrett radius gauge set. You can get the set with 1/64-1/2" gauges for less than $200, inside and outside radii, on Amazon, Prime no less. Get with the program! :-)

I think I've used this twice in 35 years.

JKJ

Re: High School Math Question

#6

Uh oh, somebody didn't drink enough coffee yet ha


Re: High School Math Question

#7

Coffee

Mark Mandell - Gone Round In New Jersey

3 cups is my limit

Re: High School Math Question

#8

Re: Opportunity

Doug Reynolds

I have some of those Starrett tools, as yet unused but, I sleep sound at night Knowing they are in my tool box standing guard against the ever present threat of Communism.

Re: High School Math Question

#9

Re: High School Math Question

John McGaw

The answer is 1/2" but that got me to thinking about how many times I've ever said to myself "what precise radius roundover do I need for this?" and the answer comes back "basically never". Invariably when it comes time to do a roundover I'll open the router bit box and look at what is there and maybe hold it up against the stock and pick what looks right (whatever the current definition of right might be). I've got roundover bits ranging from 1/16" to 3/4" (at a guess and without walking down to the shop to check) and I still just grab on instinct.

Oh, and if I did need to check the radii quickly I'd just break out a 6" machinist's rule and eyeball it -- the bits only come in certain increments and if it looks close it is probably right.

Re: High School Math Question

#10

Radii ?

Yonak

I'd rather think about words than measurements. Is it radii or radiuses ? I've always thought radii had to start from the same center while radiuses are all independent of each other.

Re: High School Math Question

#11

Re: Radii ?

Bill Tindall, E.Tn.

Are you trying to make Doug's head explode :(

Re: High School Math Question

#12

Re: High School Math Question

Keith Newton

( I've got roundover bits ranging from 1/16" to 3/4" (at a guess and without walking down to the shop to check) and I still just grab on instinct.)

You don't really start having fun until you get up to 1.5" R, which is a lot of metal spinning in your hands. I've even got 2" and 3"R in shaper bits of course, that I hope I never have to use again.

Re: High School Math Question

#13

Re: Radii ?

John in NM

I had always understood it to simply be the plural of radius, regardless of its relation to another radius.

Checking with google, I find it is also now a brand of sneaker.... I wonder if one of those shoes is called a radius by employees of the company? :D

Re: High School Math Question

#14

Re: Radii ?

William Duffield

In the context of this discussion, "radiuses" and "radii" mean the same thing. Etymologically, they are plural forms of "radius"; one is the English form, the other is the Latin form.

Re: High School Math Question

#15

Re: High School Math Question

John McGaw

I don't think any of my roundover bits is larger than 3/4". I bought that and a cove of the same size for some long-forgotten project. As for the shaper, my Robland X-31 has shaper capability and I've used it on occasion but I really don't feel comfortable with it. Big hunks of spinning metal can be scary and the bigger the scarier. Because of that I guess I only have 6-or-so cutters and cutter sets. Well, that an the hideous price that the good ones command.

Re: High School Math Question

#16

Re: Radii?  What happened to the English

Gary Smyth

or Latin

language? As near as I can understand/inturpret anything coming from a female fifteen year old, "radii" are any group of people that are not like her group -- real or superficial. Examples: Isis members in a group are international radii. But so are (within the last month or so) the civilians that purchase military style rifles, ivory poachers, skinheads, girls who wear heels to school, and on and on and on.