Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

8 Aug 2016

Good Morning Everyone,

I come off of oncall duty this morning. I'm excited about not being oncall, but with us losing people due to layoffs, oncall comes around much more often than it did before, so maybe I need to stop talking about it here and just moving on. :)

Been piddling around in the shop a bit but not much...too hot and humid for me to last for very long. Almost had a heat stroke several years ago and ever since then, I've just not been able to handle the heat very well. That's the primary reason why I look forward to cooler temps in the fall to kick off my woodworking again. :)

The new granddaughter got an "all clear" from the doc last week and we are all excited because now they can get out and visit as well as have visitors. I can't wait to spoil her rotten. ;)

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Kneale Brownson

Finished some framing

Kneale Brownson

Not the structural sort.


Last coat of finish applied Sunday on the frames for some watercolor paintings my wife's painting buddy gave her. Did the matting and made the frames out of pine 1X4 last week.

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

John McGaw

Well, I tried cleaning and organizing the shop but succeeded only in becoming more dirty myself (and I never was organized). It is amazing to find the crap that I thought might be useful sometime in the future and stashed away against that eventuality. Pieces of MDF and Baltic birch plywood less than a foot square?

Re: WC Weekend Accomplishments....

#4

Jesper, Denmark

Re: Rings a Bell.......

Jesper, Denmark

I managed to finally moving into the otium apartment this weekend, so started cleaning up and clearing out the shop. Reminds me of the old New England expression: " Box of strings too short to keep".

Only problem is that in my case the proverbial boxes are plural.

Re: WC Weekend Accomplishments....

#5

Re: I have the same problem

Hank Knight

I can't bring myself to throw away anything, especially wood scraps. They are taking over my shop! I need to bite the bullet and chuck out a bunch of that stuff.

Re: WC Weekend Accomplishments....

#6

wood scraps

John K Jordan

For those with wood scraps: scraps, especially exotics, might be gold to woodturners and knifemakers. Might make someone's day.

A scrap piece to a furniture maker could be premium turning stock.

JKJ

Re: WC Weekend Accomplishments....

#7

Re: wood scraps

John McGaw

Yeah, I understand keeping every little bit of desert ironwood or African blackwood or other exotics, all of which I've hoarded and donated to those in need. The real problem with me is that I'll keep a 6" piece of common pine or MDF or plywood just as readily. Took another trip to the dump convenience center yesterday. Maybe if I to it in a 12-step sort of way...

Re: WC Weekend Accomplishments....

#8

Re: wood scraps

John in NM

That is why I love a wood stove :D

Re: WC Weekend Accomplishments....

#9

Re: wood scraps

John K Jordan

I found that cocobolo burns extremely well.

JKJ

Re: WC Weekend Accomplishments....

#10

Re: wood scraps

John in NM

I bet it does :D

I doubt I could do that though - I burn up all the regular wood scraps but hang on to the exotics. I do burn the weirder burl offcuts, never found a use for those.

Re: WC Weekend Accomplishments....

#11

Re: wood scraps

William Duffield

I can sometimes use them for scales for utensil handles, mainly serving pieces. Or handles or knobs for small doors, drawers and lids.

Re: WC Weekend Accomplishments....

#12

Re: wood scraps

John K Jordan

Knife makers love wood scraps. With my woodturning I end up with a lot of small flat pieces of domestic and exotic woods about 6-7" long. It's an experience to watch a grown man try to keep from getting weepy eyed when given a box with a few hundred of these "scraps."

For "flat" wood artists who might not turn wood, many small pieces can be useful to make finials, pens, knobs, finger tops, and much more. Take a bucket of these to a woodturning club!

JKJ

Re: WC Weekend Accomplishments....

#13

Re: wood scraps

Larry Clinton At Frankfort, (Central) Indiana

I cut up all my Oak, Cherry, Hackberry, Hickory, and other fruit or nut woods into small pieces. I have put them in a bucket of water with a weight on top, after a day of soaking they work excellently for my smoker. I furnish some to my friend and sons.

The bags of chips sold at the store are ridiculously priced!

I still have the same problem as the rest of you as far as saving material, especially exotics. I have never figured out what size is scrap and what will be valuable later.

However it sure feels good when I find a scrap (rarely) that works on a project :)>.

Re: WC Weekend Accomplishments....

#14

Re: wood scraps

John K Jordan

This is the size of "scrap" I consider useful turning stock. As small as about 1/2" square and 1" or so long. But I don't need any - I have a 7-lifetime supply!




JKJ

Re: WC Weekend Accomplishments....

#15

Re: wood scraps

john lucas

there is not such thing as scraps in my shop. Even the smallest piece is potentially useful.

Re: WC Weekend Accomplishments....

#16

Re: wood scraps

John in NM

The parts of burl I don't save are the offcut live edges. Somewhere I do have a box of small turning blocks I made from bigger scraps and had stabilized last time I sent some parts off. Probably never get to using them, but there you go :D

Last time I had a batch for stabilizing I also sent some cherry offcuts that are now small cutting boards. Even ran one through the dishwasher a few times to see how it held up. They do dull the knives a bit quicker, but that's no problem for a guy used to sharpening planes.

Re: WC Weekend Accomplishments....

#17

Re: wood scraps

John K Jordan

John, you are a crazy man! I thought some of my things were small until I saw some of your goblets. Yours make mine look big and clunky.


A lady visiting our cub last night had a tiny bag full of tiny turned things, goblets, boxes, etc. Very clever.

JKJ

Re: WC Weekend Accomplishments....

#18

Re: wood scraps

Stuart Johnson

The parts of burl I don't save are the offcut live edges.

Zac Higgins (youtube) and others would cast them in Aluminite and make pen or bottle stopper blanks.

Re: WC Weekend Accomplishments....

#19

Interesting idea...

John in NM

But not really my speed. I think I have a box of them right now if anyone wants to try them out.

Might do a benefit auction with the pre-stabilized pieces I'll not likely use (pen blanks, etc).