Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Finishing Schedule for recent walnut pieces

Posts

Finishing Schedule for recent walnut pieces

#1

Finishing Schedule for recent walnut pieces

Bill Tindall, E.Tn.

Finishing Schedule for recent walnut pieces


The surfaces were sanded 120 through 180 with a quick touch up with 220. End grain sanding stopped at 180.

The stain was rubbed on like applying shellac with a rubber. It took less than 3 TBS to do the two pieces. The stain was formulated : 16 grams Japan Color Burnt Umber, 12 grams linseed oil and 100 grams General Finishes Prestain. First finish coat was 1 part xylene plus 2 parts Kemvar M conversion varnish. Cure overnight. Scuff sand with 400 stearated paper until smooth. Dust with 90 pis air. (at this point I had a problem described in the companion post.

Apply second coat of varnish typically diluted as before.

note: lighting changed. appears a bit red than reality