Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Rockwell 11-280 Radial Drill Press project

Posts

Rockwell 11-280 Radial Drill Press project

#1

Rockwell 11-280 Radial Drill Press project

CharlieL

I picked up this used drill press that was missing the depth stop assembly, so I found what I needed online. I decided to replace the motor, I found a stand for it, which I added a lower shelf too, and I replaced the V belt with a link belt . Yesterday I finished putting it all back together. https://sites.google.com/site/deltacontractorstablesaw/

Re: Rockwell 11-280 Radial Drill Press project

#2

Re: Rockwell 11-280 Radial Drill Press project

Hank Knight

That's a nice looking machine, Charlie. I have a thing for drill presses, but I don't have a radial. Maybe I'll start looking.

Re: Rockwell 11-280 Radial Drill Press project

#3

Re: Rockwell 11-280 Radial Drill Press project

CharlieL

Thanks Hank. It should come in handy someday when I need a 15 inch reach.