Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Cabinet Hinge Recomendation?

Posts

Cabinet Hinge Recomendation?

#1

Cabinet Hinge Recomendation?

Thomas Skaggs, Foothills of Mount Level

I haven't kept up much with the latest in hinge design. Maybe there isn't anything new?

Anyway, I have cabinets that will have full overlay doors. There is no face frame. The edges of the case are 3/4" thick. The doors will be 3/4" thick as well. I'm looking for hinges that are adjustable (Euro) and don't look awful. I probably need 110 degree open. Soft close okay but not critical.

Anyone know of a hinge that they like that fits the bill?

Thanks in advance.

T.

Re: Cabinet Hinge Recomendation?

#2

Re: Cabinet Hinge Recomendation?

Barry Irby

The Euro style hinges came along after I got out of the building business and Cabinet business. I have recently used a few. I stumbled into some by Salice. Never heard of them. Asked a friend who has been in the cabinet business forty years. He said Salice invented the Euro style hinge. I liked them. Get the "demount-able" ones. I also liked the three way adjustment. Very nice.

Re: Cabinet Hinge Recomendation?

#3

Re: Cabinet Hinge Recomendation?

Dick Coers

Plenty of options available. You'll also have to decide if you want them soft close or not.

Re: Cabinet Hinge Recomendation?

#4

Re: Cabinet Hinge Recomendation?

Keith Newton

For full overlay, you want the lowest mounting plate, and the straight arm.

Blum is the brand I use most, and soft close is an option. Sometimes I like to use one soft and one standard on the same door. They seem to take forever to close otherwise.

The up and down adjustment is usually in the mounting plate. The front to back is the screw farthest in, and side to side is toward the front.

Full overlay isn't quite 3/4", but more like 5/8", and this may depend on how far from the edge you drill the cup hole in the door. ALWAYS drill a scrap to test your backset before doing all your doors, unless you have a setup that stays the same time after time.

Re: Cabinet Hinge Recomendation?

#5

Re: Cabinet Hinge Recomendation?

William Duffield

don't look awful

They look fine, as long as you keep the doors shut. :D

I also usually use Blum Euro hinges, but I reserve full overlay frameless construction for shop furniture, like router tables. For anything else, I've only used euro hinges for face frame cabinets with inset doors. Sorry I can't be more help.