General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
OT. Putting new floor in 16' work trailer
by Terry Alexander 4/1/17, 11:22 PM
8 Replies · 45 ViewsLast post 4/3/17, 2:41 PM by Terry Alexander -
by Joseph Mulherin 3/28/17, 1:10 AM
22 Replies · 56 ViewsLast post 4/3/17, 11:59 AM by Don Orr -
Pole barn shop walls -- what to use?
by Tim Greif - West of Chicago 4/2/17, 4:56 PM
5 Replies · 67 ViewsLast post 4/3/17, 12:19 AM by Gitche Gumee Kid -
What to do with butcher block table tops?
by Barry Irby 4/2/17, 2:22 PM
3 Replies · 36 ViewsLast post 4/2/17, 10:50 PM by John in NM -
Sloping cutting board question...Bill Tindall?
by Barry Irby 4/2/17, 2:08 PM
11 Replies · 39 ViewsLast post 4/2/17, 9:38 PM by Barry Irby -
Quality hinge question BOX Makers?
by Michael van pelt 3/31/17, 6:39 PM
12 Replies · 80 ViewsLast post 4/2/17, 4:32 PM by John in NM -
Full Extension drawer slides -- 38+" length
by AZ 3/31/17, 3:25 AM
10 Replies · 29 ViewsLast post 4/2/17, 3:36 PM by William Duffield -
Replacement paint for Biesemeyer Fence Rails
by David Frame 4/2/17, 5:27 AM
0 Replies · 52 ViewsLast post 4/2/17, 5:27 AM by David Frame -
Arts Crafts Bed Cover Fine WoodWorking ? 2
by Michael van pelt 3/28/17, 1:30 PM
31 Replies · 108 ViewsLast post 4/2/17, 1:02 AM by Jim Dillon -
by Barry Irby 3/29/17, 3:43 PM
9 Replies · 50 ViewsLast post 3/31/17, 5:39 PM by Barry Irby -
by Bill Tindall, E.TN. 3/19/17, 4:11 PM
5 Replies · 34 ViewsLast post 3/30/17, 6:28 PM by William Duffield -
by Barry Irby 3/27/17, 9:35 PM
8 Replies · 34 ViewsLast post 3/30/17, 2:08 AM by Jim Dillon -
by Joe 3/29/17, 1:12 PM
8 Replies · 63 ViewsLast post 3/30/17, 1:56 AM by Dick Coers -
by roger lance 3/25/17, 4:27 PM
20 Replies · 105 ViewsLast post 3/29/17, 4:47 PM by roger lance -
Most durable Hardwood Floor finish?
by Bart Goldberg 3/25/17, 3:59 PM
8 Replies · 91 ViewsLast post 3/28/17, 10:38 PM by Bart Goldberg -
by Gary Smyth 3/27/17, 6:34 PM
3 Replies · 29 ViewsLast post 3/28/17, 7:21 PM by Tony Memphis -
by Bart Goldberg 3/27/17, 6:24 PM
8 Replies · 77 ViewsLast post 3/28/17, 7:19 PM by Tony-Memphis -
by Gitche Gumee Kid 3/28/17, 12:10 AM
3 Replies · 75 ViewsLast post 3/28/17, 3:37 PM by Barry Irby -
Is Your Bucket Half Full or Half Empty?
by William Duffield 3/28/17, 12:21 PM
0 Replies · 60 ViewsLast post 3/28/17, 12:21 PM by William Duffield -
by Barry Irby 3/27/17, 2:04 AM
6 Replies · 48 ViewsLast post 3/27/17, 9:21 PM by Barry Irby -
by Lee Ohmart 3/26/17, 1:22 AM
7 Replies · 69 ViewsLast post 3/27/17, 4:51 PM by Joe Mohnike -
WC Weekend Accomplishments....
by Dennis E Peacock 3/27/17, 12:25 PM
1 Reply · 43 ViewsLast post 3/27/17, 2:13 PM by Ralph Lipeles -
display cabinet- hinge installation
by Bill Tindall, E.TN. 3/26/17, 7:55 PM
1 Reply · 36 ViewsLast post 3/27/17, 12:30 AM by Don Stephan -
by Keith Newton 3/15/17, 2:11 AM
9 Replies · 107 ViewsLast post 3/27/17, 12:19 AM by Gary Smyth -
by Tom Norton 3/22/17, 7:45 PM
5 Replies · 36 ViewsLast post 3/26/17, 4:29 PM by Don Stephan -
by Thomas Skaggs 3/21/17, 1:52 PM
9 Replies · 36 ViewsLast post 3/25/17, 1:06 PM by Larry Clinton At Frankfort, (Central) Indiana -
Hand Tool Bucket List Discussion
by William Duffield 3/21/17, 5:58 PM
9 Replies · 57 ViewsLast post 3/25/17, 1:00 PM by Larry Clinton At Frankfort, (Central) Indiana -
JET tools Air Filtration WARNING
by Denny 3/22/17, 8:49 PM
6 Replies · 84 ViewsLast post 3/25/17, 6:17 AM by JL -
by Pat Mills 3/21/17, 10:57 PM
12 Replies · 36 ViewsLast post 3/24/17, 9:47 PM by Joseph Mulherin -
Dust Collection for Router Table
by Paul Leuba 3/19/17, 2:15 PM
12 Replies · 51 ViewsLast post 3/24/17, 8:49 PM by Hank Knight



