Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Box Spring??

Posts

Box Spring??

#1

Box Spring??

Tom Norton

Well not really a spring.

Have a full size Sleep Number bed on our second floor. Not able to get a "box spring/platform" up there. So I need to fabricate it in 2 sections.

As for construction I was thinking 1/2" ply as a frame with ply intermediates. Then a 1/4" ply top. Basically like a torsion inbox without the bottom skin.

Thoughts???

Thanks!

Re: Box Spring??

#2

Re: Box Spring??

Dick Coers

I made a few cuts on the frame of a queen sized box spring once to get it around the stairs in our sons carriage house apartment. It had to wind around and make 2, 90 degree bends to fit. I then screwed on cleats over the cuts to make it whole again. Worked fine, but was still a job to bend it and go up the stairs.

For your design, I'd still glue on a second skin for lateral stability. Vertical would be okay with one skin, but I'd worry about side loading when you get in and scoot around.

Re: Box Spring??

#3

Re: Box Spring??

Jim Dillon

Tom, I agree with Dick regarding the need for applying the second skin on your torsion box (but see below). You've already done all the labor in building the box, so adding the additional skin won't add much to the construction time. Otherwise, your choice of materials sounds reasonable. Sounds like a neat solution to your problem. Oops, just reread your post. Will your torsion box just be setting directly on the floor and not on the normal ledgers that fasten to side rails? If so, then leaving out the one skin as you originally suggested sounds like it should work just fine. Sorry for my confusion. Jim

Re: Box Spring??

#4

Re: Box Spring??

tom

I have the steel angle bracket type frame. No wooden side rails just a headboard that bolts to the frame.

Re: Box Spring??

#5

Re: Box Spring??

Jim Dillon

Got it. Then I would go with the second skin. Jim

Re: Box Spring??

#6

Re: Box Spring??

Don Stephan

Sorry to be late to the game, what would be the advantage of eliminating the bottom 1/4" ply skin? Weight saving? Time saving? Cost saving? To me, none of the three would be excessive. Without the bottom skin, seems like there is the potential for a lot of movement from side to side of the interior ribs, and possibly breakage, while transporting.