Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

JET tools Air Filtration WARNING

Posts

JET tools Air Filtration WARNING

#1

JET tools Air Filtration WARNING

Denny

I have a JET AFS-1000B air filtration system that turned itself on while I was out of the shop. When I came back into the shop, the motor was spinning slowly, roaring like a leaf blower, and it smelled like the motor was going to catch fire. This all happened within 30 minutes of me leaving the shop. I had to unplug the unit to stop it, the remote wouldn't shut it off.

I checked online, this has happened to other folks. When I spoke with someone at JET tech service, he seemed to aware of the problem, and wanted me to buy a new circuit board, but couldn't tell me if the circuit board has been redesigned to prevent this from happening.

I just wanted to let people know that they might want to unplug this unit when its not in use, or at least put a switch on the circuit.

Denny

Re: JET tools Air Filtration WARNING

#2

Re: JET tools Air Filtration WARNING

walta

Please take the time to report this hazard to the CPSC (Consumer Products Safety Commission)

Walta

Re: JET tools Air Filtration WARNING

#3

Re: JET tools Air Filtration WARNING

Denny

Excellent idea, I just filed a report.

Re: JET tools Air Filtration WARNING

#4

Re: JET tools Air Filtration WARNING

Josko Catipovic

With apologies for thread drift, how many folks use an air filter in addition to dust collection in their shop? Are these a common feature in hobbyist (noncommercial) shops?

Re: JET tools Air Filtration WARNING

#5

Re: JET tools Air Filtration WARNING

John K Jordan

I have one, don't know how common. The dust collector gets some of the dust at the source. The air cleaner can help remove fine dust that escapes and floats around the room. I have a laser particulate counter air quality monitor - you can watch the levels decrease.

It does take a while so a respirator is still advised, but only for those who care about their health!

JKJ

Re: JET tools Air Filtration WARNING

#6

Re: JET tools Air Filtration WARNING

Denny

Josko, I don't know how common they are in non-commercial shops, but I suspect they are more common where people spend more time in the shop (and create more dust).

Besides obvious health benefits, they really help to limit the amount of dust settling on everything. I'm always surprised to see how fast the filters clog up. Using air filtration is highly recommended, I would just avoid the JET (and apparently, some other JET models use the same circuit board.)

Re: JET tools Air Filtration WARNING

#7

JL

Re: JET tools Air Filtration WARNING

JL

My primary dust collection is my dust collector (cyclone).

However, when I sand a lot, I always run my Jet AFS. I don't really like running a hose to my random orbital sander as it always seems to get in the way. About the only time I do run a hose is when I am doing a wood that is allergenic.