Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Price of simple turnings?

Posts

Price of simple turnings?

#1

Bart Goldberg

Price of simple turnings?

Bart Goldberg

I was at my local farmers market on Saturday, and a new vendor was there selling some wood turnings. One Item that caught my eye was a simple round disk, made from a single piece of wood, about 8" in diameter and about 1/2" thick, with rounded over edges. They were asking $80 a piece for these. I would assume that a reasonably good turner could make one of these in about 5-10 minutes. Am I crazy or is that an outrageous price for a simple turning?

Re: Price of simple turnings?

#2

P.T. had it right

Mark Mandell - Gone Round In New Jersey

Them suckers is born ever day!!! There are people in this county who will brag about how much they paid for one of those, let alone a "Matched Set".

And there's the old "New Economics" that said make less and charge more to increase your margin.

Hint, go back at the end of the day and see a) how many he has left and b) if the price has changed.

Re: Price of simple turnings?

#3

Bart Goldberg

Re: P.T. had it right

Bart Goldberg

Mark, I saw this at the Stockton Market on Sunday. I said something to the vendor, who proceeded to try and tell me that it takes alot of work to make them. I laughed and walked away.

Re: Price of simple turnings?

#4

Re: Price of simple turnings?

John McGaw

If it is just a plain disk with rounded edges it might not even be a turning -- I could produce such stuff faster with a circle jig on the bandsaw and a router. In any case something is 'worth' what somebody is willing to pay for it -- the key is to find someone who has money but no clue. Look around and you will find absolute crap that no rational person would want selling for outrageous prices. Take a walk down Rodeo Drive sometime...

Re: Price of simple turnings?

#5

Re: P.T. had it right

Mark Nowicki

You are not crazy, but how much would you charge for a simple turning if you were turning for a living?

Re: Price of simple turnings?

#6

Re: Price of simple turnings?

john lucas

Well I'm really good with a bandsaw and router but I can make them far faster on the lathe. Both sides turned using a vacuum chuck and sanded to 600 grit would probably be about 10 minutes. maybe I could get it down to 5 or less if I did a bunch of them.

So let's just say 6 per hour. I'd be tickled pink to get $20 each for them. Around here that would be high.

Re: Price of simple turnings?

#7

Bet you can't turn them faster than a CNC router

Dick Coers

Why consider hand woodworking? CNC routers are affordable for just about everyone. I hardly ever think about buying woodworking items, so the price means nothing to me. More power to the craftsman if they can sell at any price these days! There is almost no consumer confidence in my area.

Re: Price of simple turnings?

#8

Actual cost of doing business

GolfSteve in Calgary

10 minutes to make a bowl....

Then there's overhead costs, heat, electricity, business permits, downtime due to shortage of order intake, marketing time, marketing costs, time spent procuring and picking up materials, rejected materials, mistakes, warranty costs, inventory costs, cost to build a shop and space to store blanks in, time spend drying blanks, tools, consumables, finish materials, taxes, insurance, book keeping, employment insurance, worker's compensation, vacation time, income tax, sales tax, municipal tax, time spent communicating with clients, computer costs, internet costs, and clients who don't pay their bills, shipping damage, payments to rent space at the market, time spent at the market, driving back and forth to the market, gasoline, vehicle insurance, time spent loading your stuff into the vehicle, shelving, displays, business cards, etc......plus your salary...10 minutes to make a bowl does not include the time required to do all this other stuff.

In the "consulting" world, where a company's income is based on selling manhours not products, we have to charge 2.5 to 3.5 times a person's salary to make a small profit assuming a reasonable size organization of 20-30 people and about 80% employee utilization. Larger and smaller companies often have higher overhead. The 2.5 to 3.5 multiplier covers overhead costs, downtime, and profit. An employee earning $50/hour needs to be charged out at $125 to $175/hour to make it worthwhile. Similar principles also apply to woodworkers.

In the small volume "equipment sales" world, where the company's profits, overhead, and risk costs are buried into the equipment price, we often will consume huge amounts of consulting, technical, and marketing manhours making proposals, bidding, and dealing with clients...but all of those costs are buried in the equipment price (and warranty terms), so that the sales price of the equipment is multiple times the actual cost of production. Thus if it costs us $1000 to make a widget we might have to charge $5000 to cover all of our costs.

At the end of the day, if you intend to make a decent living selling bowls, you would have to charge more than $20/bowl and sell a large volume of them - but there's not a large market for basic cheap wood bowls....but if you try to charge $100 a bowl you won't sell enough to make a living either because people won't buy them.

Re: Price of simple turnings?

#9

I dunno...

Tony-Memphis

I have one and I wouldn't want to race John! Or any good turner. Mr. Raffan come to mind.

Maybe in production, you are probably correct.