Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Bessey I Beam clamp.

Posts

Bessey I Beam clamp.

#1

Bessey I Beam clamp.

Gary Smyth

Recently in the trade magazine Woodshop News Bessey announced their heavy duty I beam clamp that is based on Pony Clamps staple I beam clamp. Pony has gone out of business. You may know all about this but it was news to me. Pony shut down in one day last May and I haven't read anything about it or why. So the orange Pony products and Jorgensen wood hand screws are gone -- been gone for a while. Bessey's replacement.

Re: Bessey I Beam clamp.

#2

A better choice

Bill Tindall, E.Tn.

I glue a lot of panels so I have a lot of experience with clamps. For routine gluing of 4/4 panels the best clamp is the aluminum bar clamp available from Lee Valley and elsewhere. They are strong and stiff enough for production gluing and they are light weight. It is nice to be able to grab 2 or 3 with one hand from the clamp rack. And because they are light, they are ideal for case gluing too. I use to have a wholesale account with the manufacturer and bought several hundred for club members.

For heavy duty gluing the Bessy clamps would be fine. But, if used Hargrave I-beam clamps can be found they have a more positive locking mechanism. They were the choice of furniture manufacturing. I have found them used for $10 or so. I am surprised that this is not the clamp someone would reintroduce.

Re: Bessey I Beam clamp.

#3

Re: Bessey I Beam clamp.

Hank Knight

I have a bunch of the original Jorgy I-beam clamps and they are powerful, for sure. I almost never use mine. If I need that much clamping pressure to pull a joint together, there's something wrong with the joint and it needs more work before then glue goes on.

Re: Bessey I Beam clamp.

#4

They look nice!

Tony Memphis

Their stuff is always good quality.