iGaging Tools
Lee Ohmart
I received an advertising email from The Craftsman Gallery offering various sets of measuring tools from iGaging. Any opinions out there about how well made these are?
Knowledge You Can Build On — Est. 1998
iGaging Tools
Lee Ohmart
I received an advertising email from The Craftsman Gallery offering various sets of measuring tools from iGaging. Any opinions out there about how well made these are?
Re: iGaging Tools
Denny
I have an iGaging 6" Digital Caliper (Inch/Metric/Fractions). Not Starrett quality, but very convenient and easy to use. I haven't used my dial caliper since I got this one.
Re: iGaging Tools
AZ in Colorado Springs
I have their digital angle cube. Has magnets on both sides and the bottom. Very useful for checking & adjusting the TS & jointer fences.
I've also used it to measure other angles. Hold it firmly on one leg and zero it out. Then shift it to the other leg and observe the reading.
Re: iGaging Tools
John K Jordan
I use a number of iGaging tools in the wood shop and my little machine shop. No problems.
JKJ
We ordered 2....
Brian Roberts
24 inch rules for the machine shop I work for.
These:
http://www.ebay.com/itm/iGaging-24-Beveled-Straight-Edge-Hardened-Steel-Accurate-to-0-0015-24-36-024K-/140996934930?hash=item20d4127d12:g:B~4AAOSwYXVY0KYQ
One was perfect......the other was WAY out of specs (their advertised specs).
They accepted, and paid for, the return with no hassles.
No experience with anything else they sell.
Re: iGaging Tools
Don Evans
I have 4 of there digital units, cube, angle, depth gauge and they all work well.
Never had any problem with them.
6" digital caliper - depth gauge
Gary Smyth
For years I used the General #143 digital 6" caliper. The price of those seems to have jumped from $24+ to nearly $40 at my supplier. Saw an ad for igauging 6" for $30 and it is stainless. Bought it off of ebay. I've had bad luck. First one digital readout literally shattered when replacing the battery. Asked for a replacement but the ebay seller wasn't interested. Lost time communicating and lesson learned. Against my better judgment I purchased another from a different seller. Two months in the digital readout went dead. I still keep the calipers for marking measurements but without any use of the digital readout so my main purpose for buying it is moot. by the way, their iGAGING 0-6" DIGITAL MULTI-GAUGE FOR WOODWORKERS AND WELDERS - 3-IN-1 TOOL - DEPTH GAUGE + HEIGHT GAUGE + THICKNESS GAUGE from Rocklear had the same problem -- bad readout reliability. From my experience the weakness of their readouts advise not to recommend. 
Re: 6" digital caliper - depth gauge
Joe Mohnike
Looks identical to the one I got from Harbor Freight. I also got one from them which was make for brake rotors and has apx. a 4 inch reach no complaints on either one of them.