Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Quality hinge question BOX Makers?

Posts

Quality hinge question BOX Makers?

#1

Quality hinge question BOX Makers?

Michael van pelt

I am building gift boxes using my Legacy Router. The through dovetail program works like a champ. The joints are perfect! I am building boxes for the Tractor-Farmer Show in July. This years featured Tractor is Allis Chalmers.

I am routing a generic (no trade mark problems) Allis-Chalmers logo on the lid and will have the inside of the lid lazer engraved with the name of the farm. Just was taking a look at the Brusso Hinge web-site. Great quality but they are expensive. Do you think my customers will care? I love the quality but will have to charge more! Will the market bear the price difference? Thoughts and or opinions?

Re: Quality hinge question BOX Makers?

#2

Re: Quality hinge question BOX Makers?

Bill Tindall, E.Tn.

Whitechapel has always sold a quality hinge. Ask for a professional discount.

Re: Quality hinge question BOX Makers?

#3

Re: Quality hinge question BOX Makers?

Denny

Michael, only you know your market and what they are willing to spend. Also, only you know how much of a price difference there is using the Brusso hinges.

I like the Brusso hinges and use them whenever appropriate. I generally get my Brusso hinges from Lee Valley, a bit less expensive than buying direct from Brusso, and they offer quantity discounts.

Re: Quality hinge question BOX Makers?

#4

FWIW -Ace Hardware

DizD

I make some production boxes and have found the Ace solid brass hinge to have good features for the money (about $4 each.) The pins are tight and the hinge leaf is a decent thickness. I use mostly the 1 1/2" (Ace # 5299821). Below that size the hinges are thin, stamped and pretty worthless. You should be able to get one locally to evaluate without having to invest in a big order. No affiliation, just passing along something that works for me.

Re: Quality hinge question BOX Makers?

#5

Re: Quality hinge question BOX Makers?

Jim Dillon

Michael, Lee Valley Hardware carries a variety of hinges with some being less expensive than the Brusso. I'm sure no expert in craft sales, but it sounds like a Brusso hinge might be overkill for the box you are designing. A nice brass-plated steel hinge might be very affordable and still look nice. The paper copy of their hardware catalog is nice to have on hand.

http://www.leevalley.com/us/hardware/page.aspx?cat=3&p=41241

Beall Tool Company makes a nice brass hinge, but pricey.

http://www.bealltool.com/products/other/npround.php

Jim

Re: Quality hinge question BOX Makers?

#6

Re: Quality hinge question BOX Makers?

Michael van pelt

thanks for the great ideas and suggestions

Re: Quality hinge question BOX Makers?

#8

Those would be easy....

Barry Irby

to install. If you had a 35mm or 1 3/8 forstner bit. I did not see the article. Is that how they installed them?

Re: Quality hinge question BOX Makers?

#9

Re: Those would be easy....

John McGaw

The article doesn't go into any depth. Clearly the installation would involve clamping the lid and box together and then drilling a shallow 35mm mortise at the joint. The simplicity appeals greatly to me since both halves are prepared simultaneously.

Re: Quality hinge question BOX Makers?

#10

I used to get them at Woodcraft... *LINK*

John in NM

No idea if they still sell them though. They had a drawn brass hinge with a fixed pin and no caps that was great for boxes and cost something like $10 a pair. I'm sure Brusso is nice stuff, but its about 3x the price of other nice stuff.

Couldn't find the hinges on Woodcraft's site, but Lee Valley appears to have something similar.... sounds a bit big though.


http://www.leevalley.com/us/hardware/page.aspx?p=40606&cat=3,41241,41249&ap=1

Re: Quality hinge question BOX Makers?

#12

Re: Quality hinge question BOX Makers?

Clementine

Just as a comparison: I've used Rufkahrs for hinges. Nice quality and reasonable prices.