General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Denis Ch�nard, Orl�ans, Ont. 4/27/07, 3:44 AM
5 Replies · 60 ViewsLast post 4/28/07, 1:05 PM by John Renzetti -
Plumbing question, Ice maker connection
by jeff 4/28/07, 2:27 AM
1 Reply · 50 ViewsLast post 4/28/07, 12:15 PM by John Veerkamp -
Shop Clutter--- Now where'd I put those...?
by Dave Morris 4/26/07, 2:53 PM
10 Replies · 61 ViewsLast post 4/28/07, 5:21 AM by Dave Morris -
Got a new fav-oh-right toy for the shop
by Dave Morris 4/28/07, 5:10 AM
0 Replies · 48 ViewsLast post 4/28/07, 5:10 AM by Dave Morris -
by Lee Ohmart 4/24/07, 4:50 PM
10 Replies · 89 ViewsLast post 4/28/07, 4:37 AM by Dave Morris -
by George 4/27/07, 2:50 PM
7 Replies · 54 ViewsLast post 4/28/07, 3:52 AM by Fred West in West Chester, PA -
by Ray Thompson - Middletown,IN 4/28/07, 2:57 AM
0 Replies · 47 ViewsLast post 4/28/07, 2:57 AM by Ray Thompson - Middletown,IN -
by Brian in Brighton 4/24/07, 4:31 AM
28 Replies · 180 ViewsLast post 4/27/07, 11:39 PM by Rod Peterson -- Ormond Beach -
OT Solution to making masks from plaster moulds
by Hamish 4/27/07, 8:46 PM
0 Replies · 49 ViewsLast post 4/27/07, 8:46 PM by Hamish -
OT - Good supervision is always important..
by JL 4/26/07, 5:43 PM
7 Replies · 50 ViewsLast post 4/27/07, 7:03 PM by Jeff Jewitt -
12" miter saw won't cut square?
by John Meikrantz 4/27/07, 3:56 AM
11 Replies · 89 ViewsLast post 4/27/07, 5:49 PM by Dave Bair - Eaton Rapids -
Are machinery reviews looking at the wrong thing?
by wilbur 4/11/07, 3:44 PM
16 Replies · 74 ViewsLast post 4/27/07, 4:25 PM by Dave Arbuckle -
by Phil Joines Krum,TX 4/26/07, 3:47 AM
2 Replies · 52 ViewsLast post 4/27/07, 4:17 PM by Carol - Strawberry, AZ -
by Rob Stokes in North Vancouver 4/27/07, 3:31 PM
2 Replies · 56 ViewsLast post 4/27/07, 4:12 PM by Jim Shaver - Oakville, Ontario -
"Coatings" or whatever on bits and blades...
by JL 4/27/07, 3:02 PM
2 Replies · 41 ViewsLast post 4/27/07, 3:55 PM by Rob Stokes in North Vancouver -
by Barry Irby 4/26/07, 11:43 AM
24 Replies · 65 ViewsLast post 4/27/07, 3:14 PM by Kneale Brownson in Northern MI -
by Rich in MN 4/26/07, 11:55 PM
14 Replies · 94 ViewsLast post 4/27/07, 2:43 PM by Bri in Mtl -
by Denis Ch�nard, Orl�ans, Ont. 4/27/07, 1:38 AM
10 Replies · 69 ViewsLast post 4/27/07, 2:30 PM by Bill Howatt -
can any one read Japanese? Dave Burnard? OT
by Ernie Miller 4/25/07, 12:28 PM
11 Replies · 60 ViewsLast post 4/27/07, 1:48 PM by Bill Earl -
Purchased drawings - long explanation and question
by Hub in Ontario 4/26/07, 1:10 PM
20 Replies · 108 ViewsLast post 4/27/07, 12:32 PM by Hub in Ontario -
by Miles 4/27/07, 11:51 AM
0 Replies · 47 ViewsLast post 4/27/07, 11:51 AM by Miles -
by Dave Endres 4/25/07, 6:30 PM
9 Replies · 56 ViewsLast post 4/27/07, 3:24 AM by John in New Mexico -
by Rob Hix - King George, VA 4/25/07, 4:37 PM
7 Replies · 50 ViewsLast post 4/26/07, 10:30 PM by Curly Smith -
by George (Oxford, NC) 4/26/07, 2:19 PM
6 Replies · 43 ViewsLast post 4/26/07, 10:27 PM by Curly Smith -
Jet 14" Bandsaw Restoration Finished...
by Dave Morris 4/21/07, 4:58 PM
12 Replies · 87 ViewsLast post 4/26/07, 10:06 PM by John Cole -
by Patrick Capobianco 4/26/07, 2:53 PM
11 Replies · 79 ViewsLast post 4/26/07, 9:22 PM by Howard Acheson -
OT Car Guy question? Alternator/diodes
by Barry Irby 4/26/07, 11:38 AM
7 Replies · 62 ViewsLast post 4/26/07, 8:07 PM by Larry Clinton At Frankfort (Central)., Indiana -
What is it about driving screws...
by Gary Evans Tallassee, TN 4/26/07, 12:07 PM
1 Reply · 42 ViewsLast post 4/26/07, 6:30 PM by Thomas Skaggs -
by wayne 4/23/07, 6:10 PM
12 Replies · 78 ViewsLast post 4/26/07, 5:53 PM by Tony - Memphis -
by Sawdust Everywhere! 4/25/07, 9:55 PM
6 Replies · 73 ViewsLast post 4/26/07, 5:45 PM by George



