Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Plumbing question, Ice maker connection

Posts

Plumbing question, Ice maker connection

#1

Plumbing question, Ice maker connection

jeff

>Hi all

A stupid question.

I am thinking of replacing the 1/4" copper pipe to my ice-maker with a braided stainless steel pipe.

The ready made connections all say they just screw on.

How does a compression fitting (the 1/4" copper pipe) get a standard screw on fitting (the type on the pre-made stainless ones.)

Are these fittings special or universal or what?

What am I missing?

Jeff

Re: Plumbing question, Ice maker connection

#2

Re: Plumbing question, Ice maker connection

John Veerkamp

>Jeff,

The premade SS icemaker lines have 1/4 compression fittings on each end. This is a pretty standard Ice maker connection. normally all you need to do is remove the copper compression nuts and screw the new line on. Don't tighten too tight.

John