Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

April Showers

Posts

April Showers

#1

April Showers

George@Colonel's Workshop-Havertown PA

>Good Mormning Friends,

I am frustrated. The weather is miserable. I had everything and everyone lined up to facilitate the acquisition transport, and shop placement of an almost new/barely used Jet Bandsaw with uninstalled riser block, fence and dollie and it pours rain! I have an open truck, the saw is 30+ miles away, and getting a new saw wet isn't an option. Now I must wait until next week because help is unavailable over the weekend. Four of my sons are going on a fishing/canoeing trip out in Central Pennsylvania this weekend while I count the raindrops on the shop windows. My #3 son will get my present Jet bandsaw, along with eight 93 1/2" blades. Pretty good deal for all of us, except my need to equip the new saw with 105" bands. Buy stock in Suffolk Machinery.

George

Re: April Showers

#2

Re: April Showers

Thomas Skaggs, Foothills of Mount Level

>Good morning Colonel,

Sorry to hear of the rain on your bandsaw parade. Such things are never a problem for me as I always buy my tools with the same standards as my wrist watches...waterproof to 30 meters.

Tommy

Re: April Showers

#3

JL

Re: Better luck next time..

JL

>Tarps work but so well, especially over 30+ miles.

Re: April Showers

#4

I Bet

Jim Shaver - Oakville, Ontario

>Hi George,

I bet if you called up John Renzetti and asked him to wind up that 5 HP Felder DC system that the skies would clear very quickly!!

:-)

Congrats on the Saw exchange

take care,

Jim

Re: April Showers

#5

Re: April Showers

Larry Clinton At Frankfort (Central)., Indiana

>Sorry about your bad luck. I have moved equipment on my open trailer using the cheap waterproof tarps successfully. I put one down on the bed, move the equipment onto the tarp, bring the tarp up on the equipment and strap, then cover with a second tarp. However this only works if you get a break in the rain long enough to do the covering up and strapping before it starts raining again. When you do get your saw, you may want to try out a Woodslicer blade from Highland Hardware. I was using the Timberwolf on my old Craftsman saw. I bought two of the Woodslicers when I got my MiniMax MM-16 - I really like them, think they are a little cleaner / smoother / easier cutting than the Timberwolf. Of course some of the difference may be in the saws!

Re: April Showers

#6

Alan Young

As My Grandfather used to say about his 3 sons

Alan Young

>One boy is a WHOLE boy. Two Boys is a HALF a boy and Three boys is NO BOY AT ALL.

Sorry George. At that rate you are really behind. I have Two boys so at least I am above ground :^)

Alan

Re: April Showers

#7

Re: April Showers????!!!

Joanne Adler in Pt. Pleasant, PA

>If Havertown had as much rain as we had (over 4"), I don't think tarps would have helped much! "April Showers" was more like "April Deluge". But, Colonel, I'm glad you had so much help lined up. As I told you, 2 of us managed to do the riser block on my saw, but more strong backs would be better (especially if they are taller than I am--duh, silly, EVERYONE is taller than I am!).

It will be worth the wait! And don't forget, Frank is here to help you joint those wider resawn boards.

Re: April Showers

#8

Re: April Showers????!!!

Fred West in West Chester, PA

>Colonel, I am sorry to hear that you lost this opportunity but next week you will be smiling from ear to hear. :o) Joanne, I have seen some toddlers smaller than you but very few with your wit. :o) Fred