Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Rikon equipment

Posts

Rikon equipment

#1

Rikon equipment

Lee Ohmart

>I have been looking around at adding a jointer and bandsaw to my collection of machines. Maybe a dust collector, too. A website had a favorable review of Rikon equipment. Anybody out there have an opinion on this stuff?

Re: Rikon equipment

#2

JL

Re: Rikon equipment

JL

>I have the Rikon 18" bandsaw that I picked up at a Woodcraft sale a while back. I'm happy with it. I've seen some of the other equipment at Redmond & Son and what I saw looks okay. I tried out one of their small lathes and it's comparable to a Jet mini in terms of handling, though not quite as good as a Jet :).

Re: Rikon equipment

#3

Re: Rikon equipment

Mark Kauder, Phenix City, AL

>I bought one of the first 14" Deluxe Bandsaws, and it is a great piece of equipment. There were a couple of minor issues with the blade guides in the first production models, but their customer service is first rate, and they sent me complete replacement assemblies right away.

Mark

Re: Rikon equipment

#4

Re: any hints for that 18" Bandsaw?

arw01

>I have one sitting in the crate still that I will assemble in the next little while. Any hints to pass along, or observations that will shorten my learning curve?




Re: Rikon equipment

#5

JL

Re: not that I can think of...

JL

>though it is a bear to move from the driveway around the house and into the basement. I had to take the table and all the "parts" down separately. The box was too much weight for the dolly and the slope.

Re: Rikon equipment

#6

Re: any hints for that 18" Bandsaw?

Andy Lincoln,In Dearborn MI

>Alan,

Ray Thompson did a review of one of these set-up back in March 2005.

Here is a link to the text that is in the message archives but no pics are there.Maybe Ray could chime in with the pics.

http://www.woodcentral.com/cgi-bin/archives.pl?read=209122

Andy

Re: Rikon equipment

#7

Re: any hints for that 18" Bandsaw?

arw01

>Thanks Andy. I will check that out and print it tonight,tape it to the box so I can find it when I finally unwrap my self present!

Alan

Re: Rikon equipment

#8

Re: Rikon equipment US CUSTOMER SERVICE EXCELLENT!

Chicago Bob

>I recently purchased (12/06) a high-end sanding center manufactured by Rikon from my local Woodcraft in Woodridge, IL. Emailed to the US Rikon Service Center in MA to purchase a spare timing belt as it looked to be somewhat unique to their equipment. Didn't have a current problem, just wanted to have a backup on the part mostly to need replacing in the next couple of years.

Next think I knew, I received a no charge belt in the mail compliments of Rikon Customer Service and the name of a direct support contact if I ever need anything else. UNEXPECTED GOOD CUSTOMER SERVICE - the kind I have only received in the past from folks like LV, Highland Hardware and on occassion, Woodcraft.

Based on my this experience, I will certainly consider Rikon for future equipment purchases.

Regards

Bob Haines

Re: Rikon equipment

#9

Re: Rikon equipment

Doug Ball

>I too have the 18" bandsaw and love it. Excellent dust collection (two ports), tension release, and easy blade changes are some of the nice features. Changing the table tilt can be a hassle, so I've avoided that temptation. Overall though, it's my favorite tool.

Re: Rikon equipment

#10

My Rikon 18" modifications, with pics

wudwork

>Couple of things I did to my new Rikon 18".

First I wanted a way to store the miter gauge:

Then How to store the allen drivers; note I found the screwdriver handle ones (with ball ends) much easier to use than traditional allen.


I made an el-cheapo rolling stand. The 4" wheels bump up the height of table to a very comfortable height for me (I am 6')


Maybe a little hard to read but here is how I control height. I applied a sticky back ruler/tape and a small sight glass. Very easy to set height once calibrated.


My idea for storing the fence.


Hope this gives ideas, Tom

Re: Rikon equipment

#11

Quick fix for allen drivers, and...

Dave Morris

>... other small tools: A magnet or two stuck in a convenient spot on the frame will keep those small items close at hand and on a short leash so they don't wander away and get lost.

Sorry, I'm been kinda stuck on a magnet kick lately. ;-)

Dave--- who found this cool little Magnetizer/De-Magnetizer for screwdrivers at a local hardware store a couple days ago--- it really works!