General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Dustmaker Mike 2/20/11, 1:08 AM
11 Replies · 36 ViewsLast post 2/21/11, 7:36 PM by John E in SC -
Interesting thought for casters *LINK*
by JL 2/21/11, 10:29 AM
2 Replies · 16 ViewsLast post 2/21/11, 4:58 PM by Jesse Cloud -
Complicating the stock preparation process.
by Virgil Johnson 2/20/11, 11:33 PM
3 Replies · 15 ViewsLast post 2/21/11, 1:49 PM by Stephen Kirk -
by Randy Johnson 2/20/11, 1:12 AM
8 Replies · 21 ViewsLast post 2/21/11, 2:34 AM by Lee Schierer McKean, PA -
Drawer/cross grain connection question
by Barry Irby 2/20/11, 11:16 PM
2 Replies · 18 ViewsLast post 2/21/11, 2:27 AM by Lee Schierer McKean, PA -
by FredD 2/20/11, 7:45 PM
3 Replies · 18 ViewsLast post 2/21/11, 12:17 AM by FredD -
by Cam 2/18/11, 9:25 PM
5 Replies · 38 ViewsLast post 2/20/11, 7:33 PM by FredD -
by David Yoho 2/19/11, 5:19 PM
6 Replies · 21 ViewsLast post 2/20/11, 7:29 PM by Dave Bair - Eaton Rapids -
by Earl Kelly 2/20/11, 7:09 PM
3 Replies · 19 ViewsLast post 2/20/11, 7:22 PM by Earl Kelly -
First try of new Enduro-Var finish
by Dave Paine 2/20/11, 2:46 PM
1 Reply · 13 ViewsLast post 2/20/11, 4:38 PM by Howard Acheson -
Ordering sweatshirts -- who wants one? *LINK*
by Ellis Walentine 2/19/11, 3:09 PM
5 Replies · 17 ViewsLast post 2/20/11, 4:13 PM by Jim in River Oaks, Ont. -
Fraternity Coffee table - pre-finish
by JL 2/18/11, 9:36 PM
12 Replies · 23 ViewsLast post 2/20/11, 3:35 PM by JL -
by A. Kapocius 2/20/11, 2:24 PM
1 Reply · 17 ViewsLast post 2/20/11, 3:11 PM by Henry Higginbotham -
by Gary Smyth 2/18/11, 8:10 PM
18 Replies · 52 ViewsLast post 2/20/11, 2:01 PM by Larry in NW OHIO -
by Randy Johnson 2/19/11, 11:36 AM
13 Replies · 44 ViewsLast post 2/20/11, 1:15 AM by Randy Johnson -
For those of us too cheap to get a FMT from Leigh.
by JL 2/15/11, 8:26 PM
6 Replies · 17 ViewsLast post 2/20/11, 12:59 AM by charlie belden -
by Chuck Lenz 2/18/11, 2:26 PM
14 Replies · 23 ViewsLast post 2/19/11, 10:21 PM by Chuck Lenz -
by steve mackay 2/17/11, 6:23 PM
4 Replies · 19 ViewsLast post 2/19/11, 4:22 PM by charlie belden -
Starting small engine question?
by Barry Irby 2/15/11, 1:45 PM
8 Replies · 50 ViewsLast post 2/19/11, 2:48 PM by Dave -
by Thomas Norton 2/19/11, 1:08 PM
2 Replies · 13 ViewsLast post 2/19/11, 2:13 PM by Thomas Norton -
by Barry Irby 2/18/11, 3:23 AM
9 Replies · 29 ViewsLast post 2/19/11, 12:35 PM by Barry Irby -
by james runchey 2/17/11, 11:01 PM
5 Replies · 19 ViewsLast post 2/19/11, 6:45 AM by FredD -
Is poplar weather resistant Enough?
by Barry Irby 2/17/11, 11:53 PM
7 Replies · 26 ViewsLast post 2/19/11, 6:42 AM by FredD -
by Grant in Iowa 2/18/11, 2:35 PM
7 Replies · 22 ViewsLast post 2/19/11, 6:38 AM by FredD -
by Timm 2/19/11, 12:09 AM
3 Replies · 44 ViewsLast post 2/19/11, 4:39 AM by Robin Corell in Atascadero CA -
by Moses Yoder 2/18/11, 2:16 PM
3 Replies · 12 ViewsLast post 2/19/11, 3:46 AM by Barry Irby -
WC Weekend Accomplishments....
by Dennis E Peacock 2/14/11, 3:12 PM
15 Replies · 30 ViewsLast post 2/19/11, 12:23 AM by Jennifer@Indy.USA -
Humm .... can you bond Melamine??
by Ron in Eugene, OR 2/18/11, 8:11 PM
3 Replies · 12 ViewsLast post 2/18/11, 10:00 PM by Jesse Cloud -
"Ingenious" dovetail layout device
by Bill Tindall, E.TN. 2/18/11, 2:53 PM
3 Replies · 18 ViewsLast post 2/18/11, 7:46 PM by charlie belden -
by George 2/15/11, 2:04 AM
11 Replies · 26 ViewsLast post 2/18/11, 7:43 PM by Mike Rubes, Apex, NC



