We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I started turning a little while back using a wood lathe that I made myself. But I am spending to much time working on the lathe rather than at the lathe. The oliver is 1000.00 I do not have a model number. My feeling is if I buy something new it will have more features in the way of imoroved electronics control, but I tend to be a little rough on stuff, and look at the beef in the Oliver and think it might be right for me. But a 1000.00 for a used lathe?
Timm, if you go to the left side of your screen you'll see a drop down menu for Messageboards. Go to the Turning forum and post your question there and you'll probably get more response to this question.
If it's an American made Oliver lathe and in good condition, your lucky just to have found one for sale. I had a Oliver 159MW, and it was built like a tank. They are Industrial duty machines.
asking if 1K of a used oliver is kind of like saying "I found a used car, shoud I buy it?" Not only does it depend on the model but also what accesories it comes with and possibly even more importantly what your needs are. Oliver made wood lathes that varied from the one pictured in a post above to monsters with over 90" of swing and beds 20' long. Most people wouldn't have any use for one of the bigger monsters no mater how well equiped for 1K.
The 159 also came with different lenths bed and a few options for motors. In any configuration a 159 compares favorably to anything delta or powermatic ever made. Post a pic or two or a ist of the acesories and model number for more feedback. I have turned of a few olivers but never a 159.
For comparison I have a delta 1460 from the late 50's and I paid $600 for it delivered in good running condition, and that was 10 years ago.