Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Drawing Spirals

Posts

Drawing Spirals

#1

Moses Yoder

Drawing Spirals

Moses Yoder

I drew the post below which is for a custom post we are having made locally. The lines depicting a spiral though are just straight lines, and I am wondering if there is a better way to draw it. I plan on using this drawing for now because it has all the info we need but was wondering about how others draw spirals. I am using AutoCad Lite 2011, which I don't believe has any 3D capabilities. We draw everything in 2D anyway since 3D takes so much more time. In an actual spiral the lines that you see rotating around the post would be curves probably drawn with splines and I don't know how to calculate the curve.


Re: Drawing Spirals

#2

Clint Searl

You have it correct

Clint Searl

As long as the angle remains constant, the projection of the threads will appear straight.

Clint


Re: Drawing Spirals

#3

Lee Grindinger

vanishing points and perspectives

Lee Grindinger

Yup, straight on it's a straight line but as the angle moves up or down from the viewer's eye the curve enters the picture.

Re: Drawing Spirals

#4

Re: Drawing Spirals

Barry Irby

They are straight lines. (I think) If you take a triangle and wind it around a shaft you get that spiral. The screw is an inclined plane wound in a circle.

I built a spiral staircase. Had to make a railing. Took a set of straight boards about a 1/4" thick and bent then around the pickets along the nose of the treads. I had visualized it as curved in both directions, but it was actually only a straight board bent. Bought every clamp in town to laminate the rail.