Dust collection ducting
Grant in Iowa
Hi all,
I am (finally) working on an order for the parts to complete ducting for my dust collection system. About five years ago, I bought an Oneida Super Gorilla 2HP cyclone, but didn't spring for the ducting at the time.
The cyclone is an awesome addition to my shop, but it is time for the ducting runs to be permanent now that the tools have each declared where they need to be long term. I grow weary of moving around an underperforming 4" flex pipe for each operation.
I realize there are engineering considerations on size of ducting and wyes, and thickness of ducting material. I am pretty much on top of how it all should be configured, which components are required, and so on. I am planning on 6" ducting right to the tool, including the flex hose section and tool connection. This is not the area of my question. I have fully read and understand Bill Pentz's information online...several times over five years.
I have been noticing, however, that I am able to pick up 24 gauge 6" "stove pipe" snap-lock pipe at the local homecenters for around a third of the cost of mail ordering actual dust collector 24 gauge snap lock piping. I am considering using stove pipe for the straight runs only and mail ordering the wyes and sweeping elbows and other specialized fittings. Other than color (the stove pipe is black and the DC stuff is galvanized), is there any difference? Will the two interchange? Surely I am not the only person who has noticed the difference in pricing and wondered as to the compatibility of the two products. Has anyone out there slid together a piece of stove pipe and a "dust collection" wye or elbow?
I have considered and priced PVC, but I prefer the steel solution for my shop. I have experience with sheet metal and already have tools to work with it.
If the two interchange, I could save around $180 or so.
Any input appreciated.
Regards,
Grant in Iowa



