Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

My first power tool

Posts

My first power tool

#1

My first power tool

Randy Johnson


How many of you still have your first power tool?

This one was part of Christmas 57' or 58'. Along with this awesome cutting machine there was a Handy Andy set of handtools (with toolbox) and a sized down workbench made by my grandfather. The saw I still have, the bench I still have, everything else is pretty much scattered.

Re: My first power tool

#2

Deeply cool.

Bill Houghton, Sebastopol, CA

Re: My first power tool

#3

Re: My first power tool

Stephen Kirk

That is really neat. I could have used it yesterday, too. Does it still work?

Re: My first power tool

#4

Re: My first power tool

Randy Johnson

It works, but right at the moment I don't where any blades are. I'm guessing it takes the same blades as a Dremel because regular coping saw blades look like they are about two times too long.

I didn't have this very long before I was allowed to graduate to the bigger Craftsman of the all cast iron construction. It had more power than the one in the picture but it still stalled out if the wood was very thick or very hard. That saw is still in mom's basement too. I wonder what it could do with that three horse motor I have that isn't doing anything...................

Re: My first power tool

#5

Re: My first power tool

Ron in Sterling, CT

Hi Randy,

I got my first power tool in 1949 when I was 10, and I still have it. It was a Craftsman cast iron jig saw like mentioned above. It still sits in my shop & is operational. I used it a great deal when I was a kid, but only use it once in a while today. My grandson did some scroll saw work on it last summer as part of his cub scout projects, and he really had a great time with it.

Ron

Re: My first power tool

#6

I remember mine

Bruce, a MN Galoot

a two-speed electric drill, bought new back in 1971. However, it wasn't cool at all, and definitely not as cool as yours. Besides that, that drill gave up the ghost after a year or two and I pitched it.

Re: My first power tool

#7

Re: My first power tool

Dave Bair, Eaton Rapids, MI

Still have the Craftsman radial arm saw I purchased in 1972. It's now mainly used as a drum sander with the addition of a drill chuck to the back side of the saw blade spindle. It's too worn and sloppy to any type of precision sawing although I still sometimes use it to do rough cross cuts on stock too wide for my compound miter saw.

Re: My first power tool

#8

My first power tool still works...

Jerry Nicholson

My first power tool was a Cummins 1/4 inch drill in a metal case with a bunch of accessories. I got it at a little neighborhood hardware store in 1948. It still works but I don't use it. It has a really worthless hand-tight Jacobs chuck that always locked up tight when I drilled more than one or two holes. I would have to use a pair of pipe wrenches to get it back open. The chuck thread size was odd-ball so I couldn't replace it with another chuck. Today's hand-tight chucks are orders of magnitude better! My 1/2 inch drill is probably 50 years old and I still use it. And my 1964 Craftsman table saw is still in use.

Jerry

Re: My first power tool

#9

In my Handy Andy

Lee Schierer McKean, PA

My handy Andy tool kit had a very small Stanley plane about 3" long. I still have it and use it.

Lee