Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Library (Panel) walls

Posts

Library (Panel) walls

#1

Library (Panel) walls

Cam

Need some help in the design area. I am redoing my office and I wanted to go with the old style library panelling on the walls. Searched for about 3 hours on how to design them and came up with nothing so either I am using the wrong search words, or there isn't anything.

Here are the issues. There seems to be some logic as to how the rails and styles are laid out, but I don't know what they are. Originally, I was going to design it like a raised panel door--styles go full length top to bottom, rails fit in between the styles.

Looking at a picture I have, it appears that on the end of the walls, the styles go full length, but on the interior, the styles fit between the upper and lower rails which extend fully across the room to the end styles. (I hope you can understand this!) Inside of that grid, if there is some logic, I can't understand it. Has anyone designed this and can give me the "rules", or anyone have a web site that explains the design.

Re: Library (Panel) walls

#2

Ellis Walentine

Re: Library (Panel) walls

Ellis Walentine

You've got a pretty good idea of the logic. There are no hard and fast rules, but in general, outside stiles run full height and inside ones don't. Often the logic depends on how the paneling will be divided up, where the breaks fall, along with aesthetic concerns and molding schedules.

If you would like to post a drawing of the wall(s), we can be more specific.

Ellis Walentine, Host

Re: Library (Panel) walls

#3

Re: Library (Panel) walls

Cam

Thanks Ellis for the info.

The wall that I am doing is straight forward, nothing to go around. Four even spaced panels in the middle, and one smaller panel at each end, all about 4 feet tall. (Pony wall in split level house.) Above the pony wall will be book shelves with doors (glass inserts) and the door frame styles will line up with the styles on the pony walls.

I think you are right about the "no rules" thing. I have seen pictures that seem to have no rhyme or reason. It could be that I don't have an artistic bone in my body too!!! :-)

Re: Library (Panel) walls

#4

Re: Library (Panel) walls

FredD

Sounds like Wainscot at the height your quoting Cam.

Here's some White Ash Wainscot , about four feet high in one of our bathrooms.

Wife says not to show with the crappy towels , but ........

https://picasaweb.google.com/lh/photo/AOxhOlxrY-3cre11CXFYtw?feat=directlink

It is a snap to make and a design I used with nearly of of the Wainscot I have made which is a lot.

If you want the particulars , email me.

FredD

Re: Library (Panel) walls

#5

Re: Library (Panel) walls

Cam

Hi Fred

Thanks for the picture. I can't tell from the picture, but did you run the outside styles all the way to the top and bottom, or do all of your styles fit between the rails? Seems like some people do it either way.

Cam

Re: Library (Panel) walls

#6

Re: Library (Panel) walls

FredD

For Wainscot i always run the top and bottom rail full length because it is more efficient to cut all of the stiles the same length and I like the look.

If you are making a lot of Wainscot , this will speed up the job and the accuracy.

The Wainscot is laid out to form a grid with as many as possible same size framed holes for the panel inserts.

Keeping in mind that centering outlets , phone jacks etc. in a panel looks better then offset.

Make frames and install and then install the panel inserts which have been picture framed with step molding I make just for that operation.

Really simple and fast to make and allows Pre finishing , before the installation.

FredD