Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

For those of us too cheap to get a FMT from Leigh.

Posts

For those of us too cheap to get a FMT from Leigh.

#1

JL

For those of us too cheap to get a FMT from Leigh.

JL

While it may take a little bit of time to build, it seems to work fine.

Cutting tenons in a leg.


Cutting tenons in an apron.


Without a router in the way.


Side shot of leg.


Net cost - about $10 of lumber, maybe $2 of bolts and screws, $20 for the five toggle clamps and $1 of glue, finish and wax. So call it $33.

Re: For those of us too cheap to get a FMT from Leigh.

#2

Now, that's a great solution!

Bruce, a MN Galoot

I've used C clamps to hold workpieces while cutting mortises with my router, and I've never liked that method, just too clumsy and mostly requires about three hands. It never once occurred to me to use toggle clamps. Very good idea!

Re: For those of us too cheap to get a FMT from Leigh.

#3

Re: Now, that's a great solution!

Larry in NW OHIO

Very good Idea JL, but you must use some very expensive glue, or use a lot of it. 8) 8) 8) :) :) Larry

Re: For those of us too cheap to get a FMT from Leigh.

#4

and if you want to make one *LINK*

charlie belden

and having acquired a Festool DOMINO I've been moving the one I did around the shop. So if someone in the SF Bay Area wants it - e-mail me and we'll work out when you can pick it up.


DIY Loose Tenon Jig

Re: For those of us too cheap to get a FMT from Leigh.

#5

Re: and if you want to make one

Neal in San Jose

I'm interested, but emails keep bouncing.

Re: For those of us too cheap to get a FMT from Leigh.

#6

Ellis Walentine

Fixed your e-mail address

Ellis Walentine

>... in case someone wants to e-mail you. :)

Cheers,

Ellis

Re: For those of us too cheap to get a FMT from Leigh.

#7

Re: Fixed your e-mail address

charlie belden

Ellis:

the e-mail address I enter into the e-mail address when posting

a new message or reply is valid - charlieb@accesscom.com

The e-mail address in my "profile" is also charlieb@accesscom.com

Don't know what the problem is with my e-mail address. I've had

this same e-mail address for about 10 years now.

Where else on WC is my e-mail address different from the one in my profile and the one I enter with my posts here?

I'm baffled and confused.