Hey JL
Jim in River Oaks, Ont.
Hey JL, a Great site thanks!
I have a friend who actually was a mechanical design engineer for a chair caster company when he first graduated from university. I will send him the link, he'll get a kick out of this I am sure.
Recently Gord and I were discussing applications and design for casters, he mentioned that often the design of a caster is based on several key functional factors, weight of the object, surface that it will be used on, centre of gravity of the object that the casters are transporting and then appearance.
He mentioned that many people miss on those factors when looking for a good application need. An example he gave me that was poor was an office chair on a concrete floor, small wheels, super hard surface etc, any trapped materials between the wheels and floor (even dust) will destroy the surface of the wheels, even catching the rotation of the wheel causing a tipping potential, especially with a heavy weight seated in a chair (centre of gravity above a calculated tipping point, a function of foot print and other exciting mathematical details). In this example he described a better solution with the application of softer wheels (hard rubber) they absorb more of the debris and the crushing effect is decreased, larger diameter and also the number of wheels based on the gross weight of the object being supported.
Weight also often over looked is a function of wheel diameter and the number of wheels used in the application. I am thinking about this recently as I build some new rolling cabinets for my shop, my concrete floor is a concern so Gord gave me a few design pointers to consider.
Gord now works for a company that designs and builds racing suspensions for the sedan class series in Europe, a long way from casters. He's also a hell of a Blues Guitarist
Take care,
Jim