General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
by Virgil Johnson 12/10/17, 3:29 PM
1 Reply · 20 ViewsLast post 12/10/17, 6:49 PM by Ellis Walentine -
Spray Finishing Ladder Back Chairs
by Tom Norton 12/9/17, 6:59 PM
3 Replies · 21 ViewsLast post 12/10/17, 4:45 PM by Bill Tindall, E.TN. -
by Gary Smyth 12/10/17, 3:42 PM
0 Replies · 30 ViewsLast post 12/10/17, 3:42 PM by Gary Smyth -
Avoiding the "plastic look" in finish
by Bill Tindall, E.TN. 12/8/17, 2:12 PM
5 Replies · 42 ViewsLast post 12/10/17, 1:04 AM by Don Stephan -
New saw purchase requires electrical upgrade
by Doug Reynolds 12/7/17, 7:27 PM
18 Replies · 38 ViewsLast post 12/8/17, 10:56 PM by Jim Dillon -
Art Deco Brass Grill Bookcase update(pic heavy)
by Alan Young 12/5/17, 3:03 PM
13 Replies · 47 ViewsLast post 12/8/17, 7:33 PM by Alan Young -
A warning about recent Fine Woodowrking article 2
by Bill Tindall, E.TN. 12/3/17, 2:08 PM
25 Replies · 118 ViewsLast post 12/8/17, 6:40 PM by Bill Tindall, E.TN. -
by John McGaw 12/7/17, 4:26 PM
3 Replies · 21 ViewsLast post 12/7/17, 8:42 PM by Bill Tindall, E.TN. -
by Scott Coats 12/7/17, 9:03 AM
1 Reply · 22 ViewsLast post 12/7/17, 1:18 PM by Marty -
by Tom dunlap 12/3/17, 10:36 PM
17 Replies · 89 ViewsLast post 12/6/17, 7:11 PM by Pete in Holland MI -
About designing and making 2 3
by Ellis Walentine 11/27/17, 11:23 AM
51 Replies · 211 ViewsLast post 12/5/17, 11:50 PM by TomD -
by Jim in Burlington Ont. 12/5/17, 7:54 AM
2 Replies · 31 ViewsLast post 12/5/17, 9:19 PM by John McGaw -
by Barry Irby 12/4/17, 2:26 PM
10 Replies · 50 ViewsLast post 12/5/17, 7:44 PM by Jesse Cloud -
Drawer front veneer feedback please.
by Lee 12/2/17, 12:06 PM
17 Replies · 73 ViewsLast post 12/5/17, 7:25 PM by Tony - Memphis -
by CJ in MPLS 12/5/17, 5:00 PM
0 Replies · 39 ViewsLast post 12/5/17, 5:00 PM by CJ in MPLS -
Something old and new on my radar, *LINK*
by Keith Newton 12/5/17, 2:47 PM
0 Replies · 44 ViewsLast post 12/5/17, 2:47 PM by Keith Newton -
The sweet smell of mineral spirits
by Bill Tindall, E.TN. 12/2/17, 11:01 PM
16 Replies · 26 ViewsLast post 12/5/17, 3:08 AM by Alan Young -
WC Weekend Accomplishments....
by Dennis E Peacock 12/4/17, 2:58 PM
2 Replies · 25 ViewsLast post 12/5/17, 12:44 AM by John K Jordan -
finish for chest and a place to mount horns
by Bill Tindall, E.TN. 12/4/17, 8:55 PM
0 Replies · 27 ViewsLast post 12/4/17, 8:55 PM by Bill Tindall, E.TN. -
by Barry Irby 11/30/17, 10:57 PM
20 Replies · 52 ViewsLast post 12/3/17, 9:09 PM by Barry Irby -
Sanding Tip-preventing cross grain scratches
by Bill Tindall, E.TN. 12/2/17, 10:54 PM
3 Replies · 19 ViewsLast post 12/3/17, 6:53 PM by William Duffield -
by JL 11/30/17, 12:15 AM
18 Replies · 26 ViewsLast post 12/3/17, 3:07 PM by Barry Irby -
by John McGaw 12/2/17, 4:17 PM
1 Reply · 20 ViewsLast post 12/2/17, 9:15 PM by Virgil Johnson -
by Barry Irby 12/2/17, 2:07 PM
0 Replies · 59 ViewsLast post 12/2/17, 2:07 PM by Barry Irby -
by Tom Norton 11/26/17, 9:21 PM
7 Replies · 20 ViewsLast post 12/2/17, 2:05 AM by ken combs -
by mike mcnerney 11/30/17, 1:51 AM
5 Replies · 29 ViewsLast post 11/30/17, 3:15 PM by Keith Newton -
by John Foster 11/27/17, 1:43 PM
3 Replies · 61 ViewsLast post 11/29/17, 5:55 PM by paul in AZ -
by Barry Irby 11/28/17, 10:17 PM
5 Replies · 21 ViewsLast post 11/29/17, 5:25 PM by Dave Bair -
by Ralph Lipeles 11/27/17, 4:49 PM
4 Replies · 17 ViewsLast post 11/28/17, 9:26 PM by John E in SC -
by Adam of Oakland 11/27/17, 1:47 AM
5 Replies · 56 ViewsLast post 11/28/17, 8:13 PM by Roy Girolami