General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
Haul from Midwest Tool Collectors meet
by Bill Tindall, E.TN. 2/4/18, 5:36 PM
17 Replies · 48 ViewsLast post 2/5/18, 2:10 PM by Hank Knight -
by Lee 2/4/18, 5:52 PM
3 Replies · 29 ViewsLast post 2/5/18, 6:03 AM by T.M. Stock -
by Ron Goldman 1/30/18, 1:26 AM
13 Replies · 39 ViewsLast post 2/5/18, 1:55 AM by Stuart Johnson -
by Ray Newman 2/4/18, 11:04 PM
1 Reply · 24 ViewsLast post 2/4/18, 11:48 PM by John K Jordan -
by Tony - Memphis 1/29/18, 3:56 PM
13 Replies · 73 ViewsLast post 2/4/18, 4:11 PM by Yonak -
by John Foster 2/2/18, 1:08 PM
2 Replies · 51 ViewsLast post 2/4/18, 1:16 PM by Larry Clinton At Frankfort, (Central) Indiana -
by Don Stephan 2/2/18, 1:26 AM
8 Replies · 142 ViewsLast post 2/4/18, 11:41 AM by JL -
by Tony - Memphis 1/29/18, 2:14 PM
7 Replies · 39 ViewsLast post 2/3/18, 3:47 PM by Jay Lombardo -
by Bill Tindall, E.TN. 1/26/18, 5:42 PM
17 Replies · 111 ViewsLast post 2/3/18, 1:33 PM by Kneale Brownson -
by Tom Norton 2/2/18, 12:59 AM
2 Replies · 51 ViewsLast post 2/2/18, 12:16 PM by Larry Clinton At Frankfort, (Central) Indiana -
Gluing to TS grid wing Question
by Barry Irby 2/1/18, 6:40 PM
5 Replies · 40 ViewsLast post 2/2/18, 1:21 AM by Don Stephan -
Elem School Woodwork Bench Design?
by Don Stephan 1/30/18, 1:01 AM
3 Replies · 51 ViewsLast post 2/1/18, 9:24 PM by William Duffield -
by Tom Norton 2/1/18, 8:44 PM
0 Replies · 38 ViewsLast post 2/1/18, 8:44 PM by Tom Norton -
Shellac Linseed Oil & Paint . . .
by Don Stephan 1/31/18, 1:31 AM
6 Replies · 49 ViewsLast post 2/1/18, 5:19 PM by Chuck Nickerson -
by Jack Guzman from Maine 1/29/18, 12:10 PM
13 Replies · 51 ViewsLast post 2/1/18, 12:53 PM by Kneale Brownson -
Sanding sponge grit equivalent??
by Tom Norton 2/1/18, 1:08 AM
4 Replies · 30 ViewsLast post 2/1/18, 12:45 PM by Tom Norton -
by terry quiram 1/30/18, 2:27 PM
11 Replies · 72 ViewsLast post 1/31/18, 6:20 PM by Don Orr -
by Kevin French 1/28/18, 7:07 PM
33 Replies · 106 ViewsLast post 1/30/18, 9:22 PM by Kevin French -
by Tom Norton 1/29/18, 8:28 PM
12 Replies · 49 ViewsLast post 1/30/18, 8:40 PM by ebd -
by Don Stephan 1/29/18, 9:48 PM
1 Reply · 38 ViewsLast post 1/29/18, 10:05 PM by Dick Coers -
by Don Stephan 1/22/18, 2:35 PM
27 Replies · 223 ViewsLast post 1/29/18, 7:17 PM by John K Jordan -
by mike van pelt 1/27/18, 6:36 PM
18 Replies · 27 ViewsLast post 1/29/18, 7:03 PM by Tony - Memphis -
by Jerry Gibbs 1/28/18, 2:04 AM
7 Replies · 50 ViewsLast post 1/29/18, 7:00 PM by Tony - Memphis -
by George Stapleford 1/26/18, 6:54 PM
12 Replies · 67 ViewsLast post 1/29/18, 5:57 PM by Rum -
WC Weekend Accomplishments....
by Dennis E Peacock 1/29/18, 2:57 PM
0 Replies · 56 ViewsLast post 1/29/18, 2:57 PM by Dennis E Peacock -
Question regarding chisel guards..... 2
by roger lance 12/29/17, 6:00 PM
29 Replies · 162 ViewsLast post 1/28/18, 6:23 PM by Ellis Walentine -
Squeeze-out can and should be avoided
by Bill Tindall, E.TN. 1/25/18, 1:04 PM
13 Replies · 83 ViewsLast post 1/27/18, 12:35 PM by T.M. Stock -
by Barry Irby 1/19/18, 11:44 PM
10 Replies · 108 ViewsLast post 1/26/18, 12:39 PM by Walt -
by HOWARD GORMAN 1/23/18, 8:59 PM
11 Replies · 84 ViewsLast post 1/26/18, 3:12 AM by Howard in Toronto -
by Derek Cohen (in Perth, Australia) 1/23/18, 4:22 PM
4 Replies · 33 ViewsLast post 1/26/18, 2:49 AM by Clint Searl



