General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
WC Weekend Accomplishments....
by Dennis E Peacock 3/30/15, 2:25 PM
3 Replies · 28 ViewsLast post 3/30/15, 4:47 PM by John in NM -
by rfcomm2k 3/30/15, 1:17 AM
5 Replies · 39 ViewsLast post 3/30/15, 2:12 PM by John in NM -
by Barry Irby 3/28/15, 1:45 PM
10 Replies · 40 ViewsLast post 3/30/15, 12:30 PM by Joseph Mulherin, sr -
by rfcomm2k 3/30/15, 1:10 AM
0 Replies · 33 ViewsLast post 3/30/15, 1:10 AM by rfcomm2k -
by Hal 3/24/15, 10:58 PM
12 Replies · 53 ViewsLast post 3/29/15, 12:46 PM by Barry Irby -
by Yonak 3/27/15, 2:14 PM
12 Replies · 49 ViewsLast post 3/29/15, 3:09 AM by TomD -
by Jerry Gibbs 3/27/15, 3:06 PM
2 Replies · 80 ViewsLast post 3/28/15, 11:56 PM by Jerry Gibbs -
by Gary Smyth 3/27/15, 8:40 PM
10 Replies · 44 ViewsLast post 3/28/15, 10:43 PM by Lee Schierer in McKean, PA -
by Ralph Lipeles 3/28/15, 2:17 PM
4 Replies · 31 ViewsLast post 3/28/15, 8:50 PM by Keith Newton -
by McKay 3/27/15, 8:36 PM
1 Reply · 45 ViewsLast post 3/27/15, 9:13 PM by Ellis Walentine -
by Tom Pilsbury (Chicago) 3/25/15, 2:23 AM
18 Replies · 64 ViewsLast post 3/27/15, 7:03 PM by Jesse Cloud -
by Roy 3/27/15, 1:56 AM
7 Replies · 32 ViewsLast post 3/27/15, 6:43 PM by Howard Acheson -
New Benefit Auction - Japanese Damascus Knife
by John Aniano in Central NJ 3/27/15, 5:27 PM
0 Replies · 36 ViewsLast post 3/27/15, 5:27 PM by John Aniano in Central NJ -
by David Frame 3/26/15, 5:55 PM
15 Replies · 36 ViewsLast post 3/27/15, 5:25 PM by David Frame -
by David Yoho 3/23/15, 9:43 AM
10 Replies · 43 ViewsLast post 3/26/15, 4:07 PM by Larry Clinton At Frankfort, (Central) Indiana -
Source for 5" Downcut Hacksaw Blades for Jigsaw
by John Foster 3/25/15, 2:52 PM
7 Replies · 30 ViewsLast post 3/26/15, 2:06 PM by George Koch -
by David Frame 3/22/15, 4:55 PM
13 Replies · 102 ViewsLast post 3/25/15, 5:50 PM by paul woolson -
by chrispy400623 3/23/15, 9:58 PM
10 Replies · 35 ViewsLast post 3/25/15, 11:57 AM by Bill Tindall, E.TN. -
by Tom 3/25/15, 12:58 AM
1 Reply · 21 ViewsLast post 3/25/15, 1:02 AM by john Veerkamp -
by Bobinnp 3/23/15, 2:59 PM
7 Replies · 31 ViewsLast post 3/24/15, 7:41 PM by Steve Schoene -
Hand Tool Chat Tonight 9:30 EDT
by William Duffield 3/24/15, 4:22 PM
0 Replies · 40 ViewsLast post 3/24/15, 4:22 PM by William Duffield -
by Bobinnp 3/23/15, 3:05 PM
8 Replies · 38 ViewsLast post 3/24/15, 3:47 PM by Bobinnp -
by Barry Irby 3/23/15, 4:54 PM
2 Replies · 30 ViewsLast post 3/24/15, 1:20 PM by Keith Newton -
by Tom 3/21/15, 4:30 PM
8 Replies · 32 ViewsLast post 3/24/15, 1:24 AM by Tom -
by Joe 3/23/15, 12:49 PM
4 Replies · 32 ViewsLast post 3/23/15, 11:29 PM by mdclor -
by Alex Grigoriev 3/23/15, 9:24 PM
0 Replies · 29 ViewsLast post 3/23/15, 9:24 PM by Alex Grigoriev -
WC Weekend Accomplishments....
by Dennis E Peacock 3/23/15, 1:04 PM
1 Reply · 26 ViewsLast post 3/23/15, 3:32 PM by John in NM -
by Bill Tindall, E.TN. 3/22/15, 5:36 PM
16 Replies · 61 ViewsLast post 3/23/15, 1:50 PM by Bill Tindall, E.TN. -
Old Red PC 7116 OmniJig Video Request
by Dave 1/25/15, 4:09 PM
5 Replies · 22 ViewsLast post 3/22/15, 2:08 PM by Dave Huber -
by ed barton 3/17/15, 9:07 PM
15 Replies · 69 ViewsLast post 3/22/15, 10:51 AM by Mark Nowicki



