Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Cyanoacrylate Glue

Posts

Cyanoacrylate Glue

#1

Cyanoacrylate Glue

David Frame

Hi Friends,

I would like to know which super glue ya'll like the best. So far, I've used Satellite City, Mohawk, and Loctite brands. I prefer the heavier, thicker super glues like Satellite City Hot Stuff UFO Thick CA Glue best mainly because it gives me time to mix with sawdust to repair any goop that may have evolved in the building process of one my projects. I mainly use it on small work and it's all I use on humidors. The trouble I've found with this particular glue is the tips are constantly getting clogged and it has a short shelf life. I really like the Loctite Gel Brand because I believe there is a bladder in the bottle so that air cannot infiltrate it's container. It has a very long shelf life. I am aware that cyanoacrylate glue can be refrigerated until it's first use. After that, it can no longer be put back in the frig. I read that while researching these glues. I would be grateful for any suggestions you may have.

Thanks for ya'lls time,

David Frame

P.S.

You're probably wondering why in the world I would use super glue on humidors when it doesn't have movement like the wood. Well, it's the perfect glue for mismatched materials. As you know, some woods have oils in them whereas others have very little or none at all. I've have yet to have any of the humidors I make and sell fail. I will admit that it is expensive to use super glue, but it's worth the results. If you have any ideas on using different glues on humidors, please let me know.

Merci

Re: Cyanoacrylate Glue

#2

Re: Cyanoacrylate Glue

Bill Tindall, E.Tn.

1. Are you aware that cyanoacrylate is not a permanent adhesive for wood? Even the moisture from air will eventually degrade the bond. It may take many years, but it is likely to fail long before traditional wood glue .

2. The only reason that a bottle could not be refrigerated after opening is leaks of the monomer out and into you carrots or moisture leaking in which will initiate polymerization. Figure out a way to seal and there is not issue with keeping it cold. A glass jar with a sealing lid like pickles come in should do the trick.

Re: Cyanoacrylate Glue

#3

Re: Cyanoacrylate Glue

John in NM

I used to use a small drill bit, like a #50 or smaller, in a pin vise to open the glue back up. I never much liked CA for wood, always seemed to soak it up too fast.

You can do the glue/dust thing with hide glue too, just use lots of dust and plan on the glue shrinking a bit as it dries.

Re: Cyanoacrylate Glue

#4

Re: Cyanoacrylate Glue

David Frame

Hi Bill,

You said, "Are you aware that cyanoacrylate is not a permanent adhesive for wood? Even

the moisture from air will eventually degrade the bond. It may take many years, but it is likely to fail long before traditional wood glue."

I'm not doubting what you said, but if you look into the Shop Shot section Between 101 and 200, 9/02/00, you will see one of nine humidors I made back in October of 1997. They were all made with Satellite City Green label super glue. As I said before, none of them have failed. That was 18 years ago.

What I really wanted to know is which, of all the cyanoacrylate glues, is the best. When making a humidor, which of any available glues, would you use?

Re: Cyanoacrylate Glue

#5

The Best Glue

David Frame

Bill,

I should have been more specific with you. I'm looking for the correct glue to adhere exotic woods. As you know, many of them have oils in them. Bocote, Cocobolo, Bubinga, all the different Rosewoods, Teak and the list goes on. I would be grateful for your help in the search for the correct glue for these woods. I am aware of the "cutting the wood and wiping it with lacquer thinner before gluing it theory." In my mind, that thinner drying of the joint is only good for a short time. My thinking behind this is that oils will eventually seep back into the cut and glues area and cause joint failure. Is my theory correct? Or is this just wishful thinking?

Thank you for your time,

David Frame

Re: Cyanoacrylate Glue

#6

Re: Cyanoacrylate Glue

ben d.

Check this web site out and it should give you some useful information.

I use this all time for various things although not for your purpose and keep it in the fridge for a long time. Order extra bottles and caps and use the large one to fill those , but the big bottle goes back to the fridge. Go heavy on the caps as those are replaced quite often.

ben d.

http://www.exoticblanks.com/Wooden-Wonders-CA-Glues/

Re: Cyanoacrylate Glue

#7

Re: Cyanoacrylate Glue

don stephan

Visit the web sites of the makers to see which ones sell extra tips.

Re: Cyanoacrylate Glue

#8

special epoxy

Bill Tindall, E.Tn.

We made some planes from Ipe. I could not find anything that stuck it. I am skeptical the acetone wipe does much benefit. It didn't help Ipe. But the epoxy that Lee Valley sells for oily wood stuck the Ipe securely.

Oily wood may be good for cyanoacrylate(speculate). The more oily it is the less moisture it will suck up to have available near the glue line.

The only differences in cyanoacrylate adhesives I can think of are monomer purity, the addition of stabilizers to prolong shelf life and what ever polymer is added to thicken it. Not obvious what effect any of these variables would have on sticking oily wood. Don't know what "wood oil" is chemically. It may well react with the glue and become part of the bond. That would be dandy.

Re: Cyanoacrylate Glue

#9

Dale Lenz

Re: Cyanoacrylate Glue

Dale Lenz

I soak my tips in acetone, dissolves the dry cyanoacrylate and is like new again.

Re: Cyanoacrylate Glue

#10

Re: Cyanoacrylate Glue

Barry Irby

I save the tips off the empty bottle and put them in a pickle jars with some acetone. I also use a small drill bit in a pin vice to open them.

Re: Cyanoacrylate Glue

#11

Re: Cyanoacrylate Glue

paul woolson

Though I hate using it, CA has it's place in my industry as well (acoustic guitars).

A couple of tips that I've learned throughout the years. Try NOT mixing the sawdust and CA but instead fill the void with sawdust and flood with thin CA. It works very well and won't flash off in your face. (I'm sure you've had it smoke and sizzle)

For brands, I like STARBOND. I have to order it as it's not available locally. It is made in thin, med thin, med thick, thick and black. And he sends about 10 extra tips with each 2 oz bottle.

Because I use a lot of cross species wood in my trade as well, I'd recommend trying epoxy over CA. Though, I've only found very oily woods like Cocobolo or African Blackwood to not bond with PVA.

I buy west systems epoxy by the gallon with measured pumps. I (being a tightwad) wrapped tape at the 1/2 point of the pumps so that I only use 1/2 at a time, yet the ratios are still spot on.

The only disadvantage with epoxy is the dry time.

Re: Cyanoacrylate Glue

#12

Re: Cyanoacrylate Glue

David Frame

Hi Paul,

Thanks for the tip using CA glue. I never thought of adding the sawdust to the piece then adding thin CA glue to build up the piece that is missing. I'm also looking into the West Epoxy System for the woods I mentioned earlier. I do have one question though. Does the West System have good creep resistance?

Thanks for your time,

David Frame

Re: Cyanoacrylate Glue

#13

Re: Cyanoacrylate Glue

Don Evans

As far as the spout plugging up the best is TITE BOND brand. Never had one plug up but all the brands you named have.

As far as best from a stand point of distillation, making it more pure then the winner is RHINO.

They don't distribute and you can only buy it from them directly. Search for it by name on Amazon, at one time they had a starter kit there.

Personally I don't care for CA type glues, life seems to dictate that you can have speed and convenience or slow and longevity.

My way of doing what you are doing what be to go with epoxy on the oily exotic's but first remove the oil with acetone where the glue is going. Run your own test with that method and you CA joint, see which is better.

Don

Re: Cyanoacrylate Glue

#14

Re: Cyanoacrylate Glue

paul woolson

I'm pretty sure it's the best of the readily available epoxies. System 3 is also good but the pre measured pumps make it worth it for me to buy the West systems. I started gluing guitar bridges with it about 5 years ago. Never and one creep or lift (which I can't say about PVA), and they have about 180lbs of constant pressure trying to rip them off the guitar's top.

I wouldn't even look at the cheap 5 minute stuff.