Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

McMaster-Carr

Posts

McMaster-Carr

#1

McMaster-Carr

David Yoho

I've seen numerous posts here over the years recommending these folks but never had a reason to try them myself until recently. Sure, I could have driven to the local W.W. Grainger but wanted to see what McMaster-Carr had.

I ordered a length of key stock so I could make a new shaft that connects the handles in the latch on a storm door at my son's house. I was blown away at how fast my order arrived. I ordered one day and had it the next. About the only thing negative I can say is they don't include cost to ship on the online order page. I've never placed an online order and received it that quickly before!

Re: McMaster-Carr

#2

typical

Bill Tindall, E.Tn.

Places that supply industrial needs have fast delivery. What has happened over the years is that these kinds of companies don't stock their spare parts and supplies. They rely on the supplier to do so.

I can order from Klingspor(industrial division), MSC, etc. in the AM and expect delivery the next day.

Re: McMaster-Carr

#3

Re: McMaster-Carr

Janice Manuel

I order from them too....so long as I get my order in by lunchtime, I always get it the next day...

Re: McMaster-Carr

#4

Re: McMaster-Carr

Joe in a Cleveland suburb

I work not too far from their Cleveland distribution center. We order stuff from them here at work and it's always delivered the next day by courier. Sometimes the same day.

No complaints from me (us).

:)

Re: McMaster-Carr

#5

MSC

Hank Knight

I get the same excellent service from MSC Industrial Supply - often next day delivery. I can't count the number of hours I've spent browsing their Big Book (catalog) and the ideas I've gotten from its pages.

Re: McMaster-Carr

#6

Re: McMaster-Carr

Ralph Lipeles

While they don't let you know what the shipping cost will be, it's always reasonable. I purchase uncommon hardware from them and also V belts for my various tools and outdoor landscape equipment.

Re: McMaster-Carr

#7

paper catalogs

Jerry Gibbs

Big paper catalogs are becoming rare. Used to make accidental discoveries while flipping the pages.

Re: McMaster-Carr

#8

Longer for me...

John in NM

But then I live out in the middle of nowhere :D

I like McMaster a lot. They have an excellent website and have CAD drawings of a lot of their parts (handy if you need dimensions, which often I do, using parts in non-standard ways as I tend to do).

They are not likely to be the cheapest place, but the convenience far outweighs that for me.

Re: McMaster-Carr

#9

Re: McMaster-Carr

William Duffield

MSC is owned by Enco (www.use-enco.com). I use Enco, because they are cheaper than the others mentioned. They also deliver quickly, but usually two days to me instead of one. They also calculate shipping and tell you what it is after you've entered your shipping address, but before they complete the order and charge the credit card. Their catalogs are nowhere near as extensive as the MSC Big Book, but I often find things I didn't know I needed in their monthly Hot Deals catalog. For example, if you are considering building a "Moxon" vise, they currently have Acme threaded rod and nuts on sale. They're still not quite as cheap as home center UNC hardware, but still much less than MSC, McMaster-Carr, Grainger or FastenAll.

Re: McMaster-Carr

#10

Re: McMaster-Carr

garthinsandiego

Just an observation...have used both McMaster and MSC extensively both personally and in my former job. MSC clearly identifies sources where McMaster does not. This is important if you have used a product and want to purchase more of the same. For example, McMaster purchased bandsaw blades were made by Morse. While I am very happy with these blades, I didn't know the manufacturer when initially purchased and have no guarantee that my next purchase will also be Morse blades. I think they may use a code in their part number to reflect the manufacturer, but not sure. MSC clearly states manufacturer of items sold. Sometimes an advantage.

Re: McMaster-Carr

#11

Re: McMaster-Carr

Larry Clinton At Frankfort, (Central) Indiana

I purchased many items from McMaster-Carr over my tenure as an Engineer prior to my retirement. Of course, the company I worked for had a discount arrangement as I recall.

As a side note when purchasing from W W Grainger, often you can find a local business like NAPA that has a healthy discount arrangement and will sell you items at 10 to 20 percent less than you can purchase direct. Grainger uses these business as retail outlets and as I recall their discount is 30% off the catalog listed price. So if you are purchasing a $500 item, you may negotiate a purchase from the retailer for $400 or so, (I had a factory discount for many years, but it was only 20%).