Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Drawer Pull/hardware question

Posts

Drawer Pull/hardware question

#1

Drawer Pull/hardware question

Barry Irby

I saw some cabinets made with drawer fronts with strong horizontal grain and the drawer pulls were either stainless or aluminum. The pulls were full width and were shaped like a J so that the leg of the J lay on the top edge of the drawer and the curl or hook of the J projected far enough to the front to proved a finger pull. I envision it coming in long lengths and being cut to fit the drawer.

Anybody got a clue what it it and where to get it?

Re: Drawer Pull/hardware question

#2

Jesper, Denmark

Re: Drawer Pull/hardware question

Jesper, Denmark

1 X 1 Stock, 1/8" roundover om the outsider corners, larger cove bit to form the underside of the pull.

Easy.

Re: Drawer Pull/hardware question

#3

i've used some shorter lengths of that,

Keith Newton

But it has been a long long time, so I'm guessing Haefele would have been the source.