General Woodworking
Cross-cutting topics, techniques, and questions that don’t fit a specialty.
Topic list
-
TopicStatisticsLast post
-
What to with walnut Butcher block tops????
by Barry Irby 2/3/17, 11:11 PM
14 Replies · 35 ViewsLast post 2/5/17, 6:28 PM by Barry Irby -
by john lucas 2/2/17, 4:13 PM
8 Replies · 43 ViewsLast post 2/5/17, 2:34 PM by Bill Tindall, E.TN. -
Couldn't find my 3M rubber sanding block,
by Keith Newton 2/3/17, 5:55 PM
2 Replies · 58 ViewsLast post 2/3/17, 10:29 PM by Dick Coers -
Display case- abnormal dovetails and some thoughts
by Bill Tindall, E.TN. 1/23/17, 2:34 PM
18 Replies · 58 ViewsLast post 2/3/17, 4:37 PM by Sgian Dubh -
by Bill P. 1/29/17, 4:07 AM
13 Replies · 42 ViewsLast post 2/3/17, 2:10 AM by Alan -
by Bill Tindall, E.TN. 2/2/17, 3:20 PM
0 Replies · 33 ViewsLast post 2/2/17, 3:20 PM by Bill Tindall, E.TN. -
by Bob 1/30/17, 8:16 PM
5 Replies · 39 ViewsLast post 2/2/17, 2:22 PM by del schisler -
Building a table saw sled for the first time.
by Lee 2/1/17, 7:17 PM
7 Replies · 34 ViewsLast post 2/2/17, 5:06 AM by jessecloud -
by Brian Holcombe 2/1/17, 5:08 PM
8 Replies · 58 ViewsLast post 2/2/17, 3:30 AM by Brian Holcombe -
WC Weekend Accomplishments....
by Dennis E Peacock 1/30/17, 5:00 AM
14 Replies · 63 ViewsLast post 2/1/17, 4:52 PM by Wayne Cease -
Hand Tool Chat, Tonight, Tuesday, 9:30 p.m. E.S.T.
by William Duffield 1/31/17, 8:56 PM
0 Replies · 29 ViewsLast post 1/31/17, 8:56 PM by William Duffield -
by Howard in Toronto 1/31/17, 12:00 AM
8 Replies · 47 ViewsLast post 1/31/17, 4:46 PM by tom -
by Don Orr 1/30/17, 3:08 PM
7 Replies · 41 ViewsLast post 1/31/17, 4:12 PM by Mark Nowicki -
by John McGaw 1/30/17, 9:19 PM
0 Replies · 39 ViewsLast post 1/30/17, 9:19 PM by John McGaw -
by Bruce Mack 1/30/17, 3:35 AM
5 Replies · 48 ViewsLast post 1/30/17, 4:02 PM by Gary Smyth -
by Mark Mandell 1/26/17, 3:01 PM
16 Replies · 30 ViewsLast post 1/30/17, 3:10 AM by Jim Dillon -
by Johanna Johanson 1/13/17, 3:58 AM
24 Replies · 67 ViewsLast post 1/30/17, 12:37 AM by johannaj -
by JL 1/24/17, 7:45 AM
16 Replies · 62 ViewsLast post 1/30/17, 12:22 AM by johannaj -
by Bill Tindall, E.TN. 1/27/17, 12:55 AM
7 Replies · 30 ViewsLast post 1/29/17, 10:53 PM by Bill Tindall, E.TN. -
On sanders, sandpaper, and future proofing
by Grant Smith 1/27/17, 5:26 PM
4 Replies · 37 ViewsLast post 1/29/17, 7:04 PM by William Duffield -
by Derek Cohen (in Perth, Australia) 1/29/17, 1:33 AM
5 Replies · 40 ViewsLast post 1/29/17, 6:03 PM by Bill Tindall, E.TN. -
computer question-Windows Update doesn't
by Bill Tindall, E.TN. 1/27/17, 2:29 PM
8 Replies · 37 ViewsLast post 1/29/17, 12:06 AM by John in NM -
by Barry Irby 1/27/17, 5:11 PM
12 Replies · 38 ViewsLast post 1/29/17, 12:01 AM by John in NM -
Best Blade for Bandsaw Re-Sawing
by Alan Young 1/23/17, 6:56 PM
20 Replies · 61 ViewsLast post 1/28/17, 11:42 PM by don stephan -
by Ellis Walentine 1/27/17, 8:08 PM
2 Replies · 98 ViewsLast post 1/28/17, 9:15 PM by Bill Howatt -
Veritas Depth Adjusters - Review and Discussion
by William Duffield 1/26/17, 1:01 AM
2 Replies · 39 ViewsLast post 1/28/17, 7:53 AM by TomD -
Veneer Thickness Characteristics
by Alan Young 1/24/17, 4:16 PM
11 Replies · 48 ViewsLast post 1/28/17, 12:50 AM by Henry Higginbotham -
by Bill Tindall, E.TN. 1/25/17, 1:02 AM
7 Replies · 33 ViewsLast post 1/26/17, 5:32 PM by Hank Knight -
by Paul 1/26/17, 2:18 AM
3 Replies · 26 ViewsLast post 1/26/17, 3:00 PM by Barry Irby -
Wall Mounted Media Console - Complete
by Brian Holcombe 1/26/17, 2:33 PM
0 Replies · 41 ViewsLast post 1/26/17, 2:33 PM by Brian Holcombe



