I have a LOT of short pieces - just too good to get rid of.
I took a turning class w/ Nick Cook. The man doesn't waste any wood. He makes wine stoppers w/ small pieces, tops, buttons for turning, etc. I am not that ambitious or frugal.
I chop all of my Cherry, Oak, Hackberry, etc. into small chunks with my bandsaw for my son's and my smoker's. I put them into a 5 gal plastic bucket, fill it with water, put a brick or so on top to hold them under and let them soak. They work quite well and make tasty chicken, pork chops, hamburgers, fish etc..
Occasionally I have bundled up a box, taken them to the club and sold the box for $5. If the definition of short is something that I will never use because it is 6" long or it has a defect, it becomes fire place starter.
Turners are the worst for saving small pieces of nice wood. Many of us have boxes of bits and pieces of tiny exotics, burl, etc. I have been known to make jewelry beads down to 3/8" or smaller. It's a bit of a sickness I think.
I've made a number of cutting boards -both flat and end grain- for charity silent auctions and to give away to family and friends. Shorter pieces less than a foot long become cheese serving boards.
These continue to be quite popular and bring in decent money for the charity..
Truth be told most just linger in 5 gallon buckets waiting for a purpose.
I've seen beautiful turnings made from glued up blocks. You'd probably have to make a fixture for the table saw so that you can safely and accurately cut the pieces to the needed shapes.
Well as a guy who turns miniatures and tried to turn the smallest goblet in the world there is no such thing as scrap in my shop. When I moved last time I had to draw the line somewhere and did throw away a couple of boxes of what everyone else would call scrap or trash. I was doing on a demo on box making for our turning club the other day and needed a small knob. Right to the scrap box I went and found exactly what I needed. A short cut off from another turning. It was 3/4" round and 3" long. Perfect. This isn't the smallest. I'm having trouble laying my hand on that photo
It's hard to find a piece of wood too small to turn. Fortunately there is so much a turner can be very picky and only use the best.
I give thin pieces of exotics and other great woods to knife makers for scales. A good way to make instant friends. I showed some tubs of "scraps" just this morning to a family who plan to come for some jewelry-making lessons.
I use otherwise worthless scraps to start fires in the wood-burning stove. Cocobolo is the best.
I make necklaces and earrings. I always want items on my sales tables that can go for $25. Nothing slows down the crowd moving by, like a jewelry display.
I've glued up several octagonal boxes then turned round for cremation urns. I cut the pieces using a jig to hold them in place to cut them on my miter saw. This makes sure the angles and lengths are consistent. I also made a jig to hold the pieces for glueing up 2 layers at a time. The jig holds the bottom layer in place while I just eyeball the overlapping layer and clamp each piece. After all the stacked layers are dry then I glue the whole works together to be turned using scrap on both ends of the blank. The lid and bottom have been pie shaped pieces or just solid wood.
I have glued scraps into laminated panels, then made cradles for a local ministry. Great for projects that will be painted, where you don't need to match up the grain or figure of adjacent pieces.
Frank Penta is at the TAW symposium this weekend showing woodturning various things made from gluing up small pieces.
The last time I visited he showed me the room he added to his 3-story shop just to hold and organize pieces for glue-ups. Frank buys thick planks of beautiful exotics then slices them up into thin pieces!
Another great use for gluing together smaller pieces is for making Beads of Courage lidded boxes, best made from dry wood. It's hard to find a 7 or 8" square block of dry wood for turning!