Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Faux Ebony Pins

Posts

Faux Ebony Pins

#1

Faux Ebony Pins

Mark Mandell - Gone Round In New Jersey

Doing an A&C bench and will be pinning the m&t's for style but short on ebony so . . .

I cut my dowel stock to 1" lengths.

Put a 1/4 cup of dna plus 1 tsp of black TransTint liquid concentrate in a medium size medicine jar added my cut pegs capped and put it on the shelf for a few days.

Pulled one out and sliced it on the band saw . . jet black all the way through.

:)

Re: Faux Ebony Pins

#2

Re: Faux Ebony Pins

Bill Tindall, E.Tn.

Good tip. If the alcohol is anhydrous, which it could be if it is in fact 50% methanol, the moisture content of the dowel will be near zero. Requilibrate as needed.

Re: Faux Ebony Pins

#3

end grain walnut

Dick Coers

I've found end grain walnut to be plenty dark for that purpose. No treatment to it at all.

Re: Faux Ebony Pins

#4

Good to know.

Jim Dillon

Mark, what wood are your dowels made from? Oak? Mahogany? I stocked up on some ebony 15+ years ago when I started making A&C and G&G furniture. Thank goodness, given its price today. Jim

Re: Faux Ebony Pins

#5

Re: end grain walnut

paul in AZ

I have never thought to use or replicate ebony but also regularly use walnut dowels for that purpose.

They are not jet black but are very dark.

I suppose if you wanted truly jet black faux ebony you could dab the walnut dowel ends with a black permanent laundry marker pen.

Re: Faux Ebony Pins

#6

Re: Faux Ebony Pins

John McGaw

How big was the pin stock? I tried something similar some years back and never got decent penetration with 1/4" maple and finally just broke down and used some of my ebony stash.

Re: Faux Ebony Pins

#7

Pin Stock

Mark Mandell - Gone Round In New Jersey

Maple 3/16

Walnut 1/4

Pins are 1" long

Re: Faux Ebony Pins

#8

Marker

Mark Mandell - Gone Round In New Jersey

Tried that but the pigment bled into the oil stain. Not good ;)

Re: Faux Ebony Pins

#9

Re: Marker

paul in AZ

Interesting. I've not had any bleeding even if I use BLO or an oil varnish over laundry marker. I routinely sign any piece I like in laundry marker.

The secret is to let the ink dry thoroughly ~like over night.

Re: Faux Ebony Pins

#10

Re: Marker

Mark Mandell - Gone Round In New Jersey

I tried a Sharpie so maybe the type of ink and drying was the problem.

Re: Faux Ebony Pins

#11

Re: Marker

paul in AZ

It must be the drying.

I also use Sharpies labeled "permanent marker" [which = laundry marker].

Their Ultra Fine Point is specially useful.

Re: Faux Ebony Pins

#12

Re: Faux Ebony Pins

Jim Hoeller

I have had good luck with good old iron oxide in water. A piece of fine steel wool, a few ounces of water and if in a hurry, some vinegar. It works well on oak and walnut.

Re: Faux Ebony Pins

#13

Re: Pin Stock

John K Jordan

How many pins are you making? You maybe want a piece of my ebony turning stock, worth the effort? (I couldn't see an email for you)

JKJ

Re: Faux Ebony Pins

#14

Made

Mark Mandell - Gone Round In New Jersey

13@ 3/16 48@ 1/4 with a couple extras in each size. All done and ready to be installed. They go in an "interpretation" of one of these:


Thanks

Re: Faux Ebony Pins

#15

Lovely!

Jim Dillon

Mark, have you managed to incorporate storage space into the bench? Jim

Re: Faux Ebony Pins

#16

Yes

Mark Mandell - Gone Round In New Jersey

My son and DIL picked this Green & Green piece out of a mag for their front hall entrance. The storage box, 18x46 and 10" deep with a center divider, is sure to fill up with sneakers and such. I therefore coated the floor with two applications of bar-top epoxy so it can be wiped clean regardless of what the kids drag in on their shoes.

Life would have been much easier if I'd bought a plan of the G&G original as I've had to do a lot of "adjust to fit" in stages and make up my own work flow plan. Several parts had to be remade but I'm in the final stages of glue-up and it'll be going to the garage for finishing later this week.

Re: Faux Ebony Pins

#17

Re: Yes

Jim Dillon

Mark, I thought so from the picture although I wasn't certain. What a wonderful, functional piece of furniture in the G&G style. And what a great gift for your son and DIL. Thanks for posting the picture and providing more detail. Jim